I think you're putting the cart before the horse. If you want people to buy wooden toys, then start selling them. If the public find them better, they will buy them. Don't blame people for offering what others apparently want to buy.

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗨𝗻𝗶𝗻𝘁𝗲𝗻𝘁𝗶𝗼𝗻𝗮𝗹 𝗛𝗼𝘁 𝗘𝗻𝗱 𝗝𝗮𝗺
20th April

OK, no-one does it on purpose, but there is such a thing as contributing negligence!
#MakerDay #MakersGonnaMake #3dPrinting

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝟱𝟬𝗺𝗺/𝘀 𝗣𝗿𝗶𝗻𝘁 𝗦𝗽𝗲𝗲𝗱 𝗗𝗲𝗯𝗮𝘁𝗲
19th April

Speed isn't everything!
#MakerDay #MakersGonnaMake #3dPrinting #SlicerSettings

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗿𝘆𝗶𝗻𝗴 𝘁𝗼 𝗘𝘅𝗽𝗹𝗮𝗶𝗻 𝗬𝗼𝘂𝗿 𝗛𝗼𝗯𝗯𝘆 𝘁𝗼 𝗮 𝗡𝗼𝗻-𝗠𝗮𝗸𝗲𝗿
18th April

What do you mean, "just buy one"?
#MakerDay #MakersGonnaMake

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗨𝘀𝗶𝗻𝗴 𝗣𝗹𝗶𝗲𝗿𝘀 𝗮𝘀 𝗮 𝗛𝗲𝗮𝘁 𝗦𝗶𝗻𝗸
17th April

You are not the only one!
#MakerDay #MakersGonnaMake #Soldering #Electronics

How to Use an Oscilloscope Learn the basics about oscilloscopes, how to use them, and how to calculate the amplitude and frequency of an analog signal.

An overview and introduction to using oscilloscopes - ideal for those getting started.
#Oscilloscope #Electronics #Tutorial

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗠𝘆𝘀𝘁𝗲𝗿𝗶𝗼𝘂𝘀𝗹𝘆 𝗙𝗹𝗶𝗰𝗸𝗲𝗿𝗶𝗻𝗴 𝗟𝗘𝗗
16th April

It was working perfectly an hour ago!
#MakerDay #MakersGonnaMake #Electronics #QualityControl #BugHunting

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗙𝗶𝗻𝗱𝗶𝗻𝗴 𝗮 𝗨𝘀𝗲 𝗳𝗼𝗿 𝘁𝗵𝗲 𝗙𝗮𝗶𝗹𝗲𝗱 𝗕𝗲𝗻𝗰𝗵𝘆
15th April

This is the chance to really make millions!
#MakerDay #MakersGonnaMake #3dPrinting #Benchy

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗗𝗲𝗰𝗹𝗮𝗿𝗶𝗻𝗴 𝗦𝘂𝗰𝗰𝗲𝘀𝘀 𝗣𝗿𝗲𝗺𝗮𝘁𝘂𝗿𝗲𝗹𝘆
14th April

That stuff at the end isn't... oh wait!
#MakerDay #MakersGonnaMake #ProjectManagement

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗣𝗲𝗿𝗽𝗲𝘁𝘂𝗮𝗹 𝗙𝗶𝗿𝗺𝘄𝗮𝗿𝗲 𝗨𝗽𝗱𝗮𝘁𝗲 𝗖𝘆𝗰𝗹𝗲
13th April

Yes, we appreciate that the Devs keep improving stuff but does it really need to be 4 times a week?
#MakerDay #MakersGonnaMake #Maintenance

There was a time, back in the eighties where some groups were putting small fire bombs in the pockets of suits. I think that was when it started.

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗔𝗿𝗯𝗶𝘁𝗿𝗮𝗿𝗶𝗹𝘆 𝗔𝗱𝗷𝘂𝘀𝘁𝗶𝗻𝗴 𝘁𝗵𝗲 𝗣𝗜𝗗 𝗧𝘂𝗻𝗶𝗻𝗴
12th April

No idea what an integral is, but I'm pretty sure if I double this number...
#MakerDay #MakersGonnaMake #electronics #3dPrinting

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗠𝗼𝗺𝗲𝗻𝘁 𝗬𝗼𝘂 𝗥𝗲𝗮𝗹𝗶𝘀𝗲 𝘁𝗵𝗲 𝗦𝗗 𝗖𝗮𝗿𝗱 𝗶𝘀 𝗙𝘂𝗹𝗹
11th April

Yes, data does take up space!
#MakerDay #MakersGonnaMake #Arduino

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗠𝗼𝗺𝗲𝗻𝘁 𝗬𝗼𝘂 𝗥𝗲𝗮𝗹𝗶𝘀𝗲 𝘁𝗵𝗲 𝗦𝗗 𝗖𝗮𝗿𝗱 𝗶𝘀 𝗙𝘂𝗹𝗹
11th April

Yes, data does take up space!
#MakerDay #MakersGonnaMake #Arduino

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗦𝗼𝗹𝗱𝗲𝗿 𝗕𝗿𝗶𝗱𝗴𝗲 𝗼𝗳 𝗗𝗼𝗼𝗺
10th April

No, flux is not just for amateurs!
#MakerDay #MakersGonnaMake #Soldering #Electronics

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗿𝘆𝗶𝗻𝗴 𝘁𝗼 𝗗𝗿𝗶𝗹𝗹 𝗧𝗵𝗿𝗼𝘂𝗴𝗵 𝗦𝘁𝗮𝗶𝗻𝗹𝗲𝘀𝘀 𝗦𝘁𝗲𝗲𝗹 𝘄𝗶𝘁𝗵 𝗮 𝗖𝗵𝗲𝗮𝗽 𝗕𝗶𝘁
9th April

Some consumables are REALLY consumable!
#MakerDay #MakersGonnaMake #BuyCheapBuyTwice

How to Use a Real-time Clock Module with the Arduino Learn how to get the current date and time on an Arduino with a real time clock module. We demonstrate with an example project that outputs the date and time to an LCD.

A nice walkthrough of how to integrate an RTC module in other #Arduino projects.
#ArduinoProject #arduinotutorial

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗣𝗲𝗿𝗳𝗲𝗰𝘁𝗹𝘆 𝗔𝗹𝗶𝗴𝗻𝗲𝗱 𝗭-𝗦𝗲𝗮𝗺 𝗛𝗼𝗮𝘅
8th April

in tribute to the millions of hours developers have spent trying to get this right!
#MakerDay #MakersGonnaMake #3dPrinting

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗥𝗲𝘃𝗲𝗿𝘁𝗶𝗻𝗴 𝘁𝗼 𝘁𝗵𝗲 𝗢𝗹𝗱 𝗖𝗼𝗱𝗲 (𝗮𝗻𝗱 𝗜𝘁 𝗦𝘁𝗶𝗹𝗹 𝗗𝗼𝗲𝘀𝗻'𝘁 𝗪𝗼𝗿𝗸)
7th April

For all those who can't be bothered to learn how versioning works...
#MakerDay #MakersGonnaMake #Coding

How to Use Stepper Motors on the Arduino A step-by-step guide to controlling stepper motors with the Arduino, complete with wiring diagrams, example code, and more.

If you need to control several stepper motors then there are quite a few ready made solutions, but this detailed walkthrough is handy if you are looking to use a single stepper
#Arduino #ArduinoProject #Automation
www.circuitbasics.com/how-to-contr...

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗠𝗼𝗺𝗲𝗻𝘁 𝗬𝗼𝘂 𝗗𝗿𝗼𝗽 𝘁𝗵𝗲 𝗧𝗶𝗻𝘆 𝗦𝗰𝗿𝗲𝘄
6th April

And why is it always the one where you've got no spares!
#MakerDay #MakersGonnaMake #Workshop

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗨𝗻𝗲𝘅𝗽𝗹𝗮𝗶𝗻𝗲𝗱 𝗥𝗮𝘀𝗽𝗯𝗲𝗿𝗿𝘆 𝗣𝗶 𝗖𝗣𝗨 𝗟𝗼𝗮𝗱
5th April

It's just a couple of sensors!
#MakerDay #MakersGonnaMake #RPi #RaspberryPi #RPiProject

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗙𝗼𝗿𝗴𝗲𝘁𝘁𝗶𝗻𝗴 𝘁𝗼 𝗜𝗻𝗰𝗹𝘂𝗱𝗲 𝘁𝗵𝗲 𝗠𝗼𝘂𝗻𝘁𝗶𝗻𝗴 𝗛𝗼𝗹𝗲𝘀
4th April

Nooooooooooooooooooo!
#MakerDay #MakersGonnaMake #DesignMatters

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 '𝗜𝘁 𝗢𝗻𝗹𝘆 𝗡𝗲𝗲𝗱𝘀 𝗮 𝗦𝗺𝗮𝗹𝗹 𝗧𝘄𝗲𝗮𝗸' 𝗟𝗶𝗲
3rd April

Just a tiny change and three we have it... Version 427.85
#MakerDay #MakersGonnaMake #NeverEndingProject

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗥𝘂𝗻𝗻𝗶𝗻𝗴 𝗢𝘂𝘁 𝗼𝗳 𝘁𝗵𝗲 𝗖𝗼𝗿𝗿𝗲𝗰𝘁 𝗙𝗶𝗹𝗮𝗺𝗲𝗻𝘁 𝗖𝗼𝗹𝗼𝘂𝗿
2nd April

Hmnnn... Chess pieces in baby pink also look good!
#MakerDay #MakersGonnaMake #3dPrinting #NeverEnoughFilament

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 '𝗪𝗼𝗿𝗸𝗶𝗻𝗴 𝗧𝗶𝘁𝗹𝗲' 𝘁𝗵𝗮𝘁 𝗕𝗲𝗰𝗼𝗺𝗲𝘀 𝘁𝗵𝗲 𝗙𝗶𝗻𝗮𝗹 𝗡𝗮𝗺𝗲
1st April

Oh let's just go with that!
#MakerDay #MakersGonnaMake

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗣𝗿𝗲𝘁𝗲𝗻𝗱𝗶𝗻𝗴 𝗬𝗼𝘂 𝗘𝗻𝗷𝗼𝘆 𝗣𝗼𝘀𝘁-𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗶𝗻𝗴
31st March

For all those who prefer 3 hours of filing to get a perfect fit.
#MakerDay #MakersGonnaMake #3dPrinting #postprocessing

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗝𝘂𝘀𝘁𝗶𝗳𝘆𝗶𝗻𝗴 𝘁𝗵𝗲 𝗛𝗶𝗴𝗵 𝗖𝗼𝘀𝘁 𝗼𝗳 𝗥𝗮𝘀𝗽𝗯𝗲𝗿𝗿𝘆 𝗣𝗶 𝗔𝗰𝗰𝗲𝘀𝘀𝗼𝗿𝗶𝗲𝘀
30th March

How much??? Oh well, it looks so cool!
#MakerDay #MakersGonnaMake #RPi #RaspberryPi

How to Reduce Power Consumption on the Arduino Learn power saving techniques that will allow your Arduino project to operate off of the grid.

Power-Saving with Arduino Projects

A clear introduction with code and explanations of how to reduce power consumption with your Arduino projects.
#Arduino #ArduinoProject

www.circuitbasics.com/lowering-ard...

𝗜𝗻𝘁𝗲𝗿𝗻𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗗𝗮𝘆 𝗼𝗳 𝗧𝗵𝗲 𝗠𝗼𝗺𝗲𝗻𝘁 𝗬𝗼𝘂 𝗦𝘁𝗲𝗽 𝗼𝗻 𝗮 𝗟𝗼𝗼𝘀𝗲 𝗥𝗲𝘀𝗶𝘀𝘁𝗼𝗿
29th March

Well, at least it wasn't a Lego brick!
#MakerDay #MakersGonnaMake