and China I think (Shein and Temu were mentioned, that is the only part that makes me happy). This is going to create import gridlock. He'll need to hire a bunch of people to process the volume... Oh wait, the existing ones already took his early retirement offer...
As in you'll never see the money? or perhaps retirement age will keep moving as you get closer? or "rather burn out than fade away"?
Hey Paul, sorry to hear you're not well. Take care.
They're ewaste from a company I once worked for. Am trying to rescue them from the crusher.
50 fitness bands with straps removed and loaded into usb hubs ready for charging.
Unfortunately they're all past their shelf life and the lipos have discharged to 0V. So far I've charged up about 10 bands and all came to life. Am getting ready for a charging test of 50 bands. If this works I'll move ahead with distributing the bands somehow (2/2).
Am finally getting back to this fitness band project. I have something like 8000 of these nrf52 based bands stored under my house. I have open source dfu images to replace the stock firmware and schematics. (1/2)
There is some really good footage on YouTube.
youtu.be/gdk_KUFUp98?...
Teenage boys all over Melbourne shed a quiet tear when they retired route 69 in 2004. en.m.wikipedia.org/wiki/List_of...
Renumbering all the tram routes in a city at once will surely cause chaos? Especially for the elderly?
Agreed, but there is a lot to know. For instance, am confused about damage due to discharge to 0V - seems to be a lot of confusion around this. Perhaps it's a scientific maybe so the correct answer is maybe?
I used to watch my dad do this to his (nylon) rope as a kid. Makes me miss him every time I do this.
If it's within the licence it wouldn't be theft. Do you know the firmware? Blinking leds under IR control doesn't seem especially difficult. To me the cleverness is in the PCB design.
I needed a NC 120VAC relay recently (to shut off a furnace that misbehaves occasionally), put the relay in a metal wall box and opto isolated the electronics in a separate box.
Clearly Darwin has a plan. Happy to sit this one out in Canada and keep our dairy/medical protections strong.
Daft punk helmet on the big screen.
Oh yeah.
It's probably more complicated than this. Might have failed FCC testing with the slot so they had to abandon it
I loved it but went with the wrong people so I had to pretend I wasn't enjoying myself. My favourite was the Put it in a Box song but there was so much fun in there. This is an old but good interview with Trey and Matt.
www.npr.org/2019/12/27/7...
I also added .md generation from the BoM (see github.com/TomKeddie/pr...). Am keen to add more self-updating documentation stuff to my Makefile so the .md can point to schematic and pcb images too. Unfortunately there is no png generation in kicad for schematic or pcb images yet.
The #kicad placement file format is hard coded (see place_file_exporter.cpp) - I don't have it in me to submit a PR for a variable fields. Instead, I've added support for jlc rotation fixes using a python script (github.com/TomKeddie/pr...). I know there are plugins but I tire of installing them.
I've been really enjoying the #kicad cli added in recent versions. It's helped me form the #jlcpcb bom format without needing any plugins (when combined with the awesome dnp enhancements in kicad). See my Makefile at github.com/TomKeddie/pr...
The esp32 will run #esphome - I think people have 7 segment clocks running already, if not will be a good excuse to learn how to build extensions. I love being able to do projects that need software but having to write very little of it myself. esphome is gold for this, so capable.
Is looking good in #kicad 3d view. Hoping all the mechanical is ok. There's an esp32 on the back, I'll solder that myself. Was an exercise in bait-and-switch as I got excited by all the esp32 IO and then rewired to meet all the pullup/down requirements. Have ir rx, rgb led and button on the top.
Wondering if you've posted on the antenna setup you're using? Would be interested to know.
All were removed with a Hakko 850D hot air unit I bought on ebay. I was fortunate to attend a soldering workshop in Shenzhen in 2014, this taught me a lot about hot air rework. You need to be patient and use way more heat than you might want to.
youtu.be/LQjV2APK9zQ?...
Next victim in my quest to move more things to open source control is an led strip controller. The WR3 came away easily but this controller routes all the buttons and leds though another micro and uses it to talk to the WR3 over uart. Have removed the other micro and will strap the IO to the esp.
Enough hair product to start an inferno!
In today's lesson on cursed dimensions we tempt you but then deliver all but the things that are really useful.
@michael.barcella.com It's sunny over here in nerd-ville, come join us.
Every now & then I come across parts in my collection priced in $NT. I was last in Taiwan in early 2000, that's a while ago. Whole lives have been lived since I bought these. I took them back to Australia with me & then moved to Canada with them. People talk about food miles, I have part miles.
@tubetime.bsky.social am pretty sure I learnt this technique from watching your work. Thanks.
Will also use the same image to ensure the LED placements are compatible. Again, tolerances are high so accuracy is not super important here.