Five enamel pins arranged in a two by two collage, each pin held up by a person's hand. Top left are two small text pins that say "shizun" in white capital letters with gold and silver plating respectively. Top right is Luo Binghe's face screaming with tears in his eyes, bottom left is a bust of Shen Qingqiu hiding his mouth with his fan, and bottom right is a bust of Liu Qingge glaring off to the side. In the middle is a circle that reads "manufacturer photos", and over each photo is "sample" repeated in a circle. Above Luo Binghe there is a note: "adding glitter to pupils, like on XL". Above Liu Qingge there is also a note: "same skin tone as others, making hair guan screenprint two tones darker for mass".

An enamel pin held up by a person's hand, depicting Shen Qingqiu as a sphinx cat with a human face and hair, holding a sphinx kitten Luo Binghe who has his eyes closed but also has long hair. A note on the image reads "swapping green glitter fill for mass (incorrectly applied)" and an arrow shows the areas with fill colours to be swapped.

Two enamel pins face-up and six face-down, arranged in a two by two collage, each pin held up by a person's hand. The two face up pins are a bust of Hua Cheng standing with his arms raised in front of flames, and Xie Lian's face staring at the viewer with his straw hat on. The face-down pins are all of the previously depicted pins except for the "shizun" minis, showing colourful rubber backing clutches and a raised backstamp that reads "hellionophore".

Samples are done :D

I'm just getting my rep to double check the red fill on Hua Cheng, but otherwise these are ready for preorder!

Tentatively planning for Sat April 25th 9am AEST (limited slots)

Listings will be up for 36hrs unless sold out prior. I'll aim to have some leftovers once in-hand ^^

A collage of various cropped listing photos from the Hellionophore shop with labels listing the quantities remaining. An annotation reads "low stock heads up!" with a subheading "not planning to restock any of these". There are 4~8 left of various small greyscale danmei stickers, 2 left of a Wei Wuxian skater boy sticker, 5 left of a Moth Wei Wuxian sticker, 3 left of an eldritch angel Ferretlian sticker and 8 left of a variant of angel Ferretlian with rainbow fabric, 2 left of a ginger cat angel sticker, 2 left each of Shen Qingqiu and Luo Binghe washi sticker chibi heads by Ritsu, 1 left each of a Moth Wei Wuxian wood badge and Wei Wuxian skater boy wood badge, and 5 left of a BMO sticker with a trans pattern on the body.

Another collage of listing photos with remaining quantities labelled. There are 3 left of a pink and gold smiley keychain, lots of smiley stickers, 6 left of a greyscale eldritch ophan angel sticker, 3 left of a black and white angelic reaper sticker, lots left of a black and white birdcage sticker filled with angel wings, and 3 left of a black and white angelic moth sticker. There are 4 left each of aluminium sword keychains in two designs, and 3 left of a photo manipulation print depicting creatures on a hiking path, with a note reading "I'd consider restocking again but ideally I'll be retiring this print, you can still find it on INPRNT c:". There are 2 left of a pearl coral bead enamel pin that is limited edition 25 pcs, and 1 left of an orange keychain with Xie Lian skewered by swords, 2 left of an orange keychain with Xie Lian holding a crying smiling mask, and 1 left of an orange keychain with Wei Wuxian standing in front of a white moon with crows.

Sorry for the scuffed collages LMAO here are some low quantity designs in the shop rn that won't be getting restocked!

I might add some to print on demand later (non-profit or donations for danmei designs), but feature artists' works won't be included.

Don't miss out! The US GO is still open ✌️

If you have any questions about the drop or concerns about your order, feel free to either reply to me here, DM on IG (no DMs here pls I don't get notifs), or send through an email/contact form!

Apologies for the last-minute mess and thank you again for the orders so far 🥹

UNITED STATES Orders will be held until further information comes out regarding tariff collection/suspension If you choose tariffs paid: shipping cost includes 15% tariff and Zonos fees, will be partly OR fully refunded if the situation changes If you choose tariffs unpaid ($22.20 AUD): no refunds required, but you will likely have to pay tariffs + fees before I can ship your order Note: if you want to buy stickers with tracked non-flat items (e.g. pins) in your order, please order them separately and select “Combine with tracked items” at checkout to remove the second duplicate shipping cost. Otherwise it defaults to tariffs unpaid >^<; UNITED KINGDOM & EUROPEAN UNION Not enabled at checkout Please either a) fill out a contact form to request a custom order (Wise/Revolut/Paypal/Stripe payment), b) use a proxy address, OR c) use an Australian dummy address and contact me ASAP with your correct address so I can invoice you the remaining shipping cost AUSTRALIA (DOMESTIC) & OTHER INT’L Shipping as normal! Dispatch may take up to 2 weeks o7

Slight update to the details for US orders for this drop too please give this a read, it's also in the drop details listing in the shop 🙏

Thank you so much to those who have placed an order already!

A collage of six photos of enamel pins on fabric backgrounds.

A sale graphic stating 20% off with code CLEAROUT on old stock, including P4P (pls I need space). Listings #20~44, excludes most enamel pins but V1 A-grade elemental fans are already 20% off

New listings are live!
hellion04.myshopify.com

Add to a previous order using code POSTOVERRIDE (make sure your order details are the same)

Sale on old stock! Use code CLEAROUT

Gonna be a couple minutes late to add the new listings I've been adjusting US shipping all morning AAAAA

LAST MINUTE GROUP ORDER UNITED STATES Serena has very kindly offered to help again with a rush GO for the US! If you would like to join this rush GO, please use the code SERENA0226 at checkout to clear shipping costs, and I will forward your shipping & contact details to Serena. When your items arrive in the US, Serena will contact you via email to collect a) the proportional split of international shipping + tariffs and b) the cost of shipping domestically to you. Make sure the email address you provide is one you check regularly! After you order, please fill out the contact details form with your details: https://forms.gle/6NXGZKQ3dx9P4vuR9 Serena’s contact details Instagram: @serenadanmeipins Twitter/X: @wangxianlwjwwx Email: serenadanmeipins@gmail.com

VERY LAST MINUTE US GO

Use code 'serena0226' at checkout to clear shipping costs (25 slots)

Contact form to fill out after you order: forms.gle/6NXGZKQ3dx9P...

Yes they will be held still, apologies for the confusion! I woke up today to the announcement of potentially 10%→15% so I'm still trying to figure out the best option 😭

The hold might only be a week, or it might be longer depending on how the change gets implemented, I'll be updating regularly orz

Ok looks like IEEPA tariffs have ended, but there will be an ad valorem 10% (*rolls eyes*) and still no de minimis. Australia was already subject to 10% + fees, so rates will stay the same in my shop.

I'll keep the taxes unpaid option up for now but pls expect an invoice once I can ship again >^<;

I'll be making sure folks get their orders some way or another, don't worry. If you have any questions or concerns, please contact me! I don't get notifs for DMs on here so best bet is either email, submit a contact form (link in my carrd), or DM on IG ^^

Given this development I really don't think things will sell quickly during the in-hand drop, so if you're in the US and want to wait until the situation gets clearer to order, then feel free; just bear in mind that I cannot guarantee stock availability later on. P4P pins will not be restocked 🙏

UNITED STATES Orders will be held until further information comes out regarding tariff collection/suspension If you choose tariffs paid: 10% tariff and Zonos fees will be fully refunded before shipping if the situation changes If you choose tariffs unpaid ($22.20 AUD): no refund required, but tariffs may have to be paid before shipping Note: if you buy stickers in your order it defaults to tariffs unpaid >^<; No details have been shared yet as to the possibility of tariff refunds on past shipments from US CBP, but if they do happen, they will almost certainly exclude Zonos & CBP disbursement fees UNITED KINGDOM & EUROPEAN UNION Not enabled at checkout Please either a) fill out a contact form to request a custom order (PayPal/Wise/Revolut payment), b) use a proxy address, OR c) use an Australian dummy address and contact me ASAP so I can invoice you the remaining shipping cost AUSTRALIA (DOMESTIC) & OTHER INT’L Shipping as normal! Dispatch may take up to 2 weeks o7

Also I saw the latest mess with US tariffs... orz

This is my current plan for tomorrow's drop. If anything changes drastically today I'll make adjustments, but probably will be putting US orders on hold. If you're in the US, please only order if you are prepared to pay tariffs

A photo of three fan-shaped enamel pins themed after the system from Scum Villain's Self Saving System. Two are teal, and one is red. The two real fans read "U Can U Up" and "No Can No BB" respectively, while the red one reads "O O C" with two warning symbols either side. The pins are on a floral fabric background with a red floral folding fan below, and rectangular teal system menu stickers arranged in a line above the pins.

A photo of twelve mini enamel pins arranged in a grid, forming three rows and four columns. The three rows all have the same linework, and the four columns all have matching colour palettes. The top row of Trematoda pins are a pear shape, the middle row of Turbellaria pins are a wavy shape, and the bottom row of Cestoda pins are segmented with a spiky mouth part. The left two columns have red fill colours, the left column having gold plating and middle left having black nickel plating. The middle right column has teal fill colours and silver plating, and the right column has white fill with polarising powder and gold plating.

P4P SV leftovers dropping tomorrow!

If you haven't ordered P4P from me before, please make sure you check out my policies before the drop. The system fans are limited to 2 per person per design due to low quantities.

The parasites have no limit - if you like them go nuts :D

#svsss #enamelpins

Whether I have the shop funds to sample the designs with less interest depends on how much stock sells during the in-hand drop, so if you're considering buying anything, I would be very grateful!!

The nyangels will probs be shelved for now but I'll make more designs to join them in the future :)

The interest check form will also close on Sunday, probably 12hrs or so after the in-hand drop!

I'll be sampling those that got at least 25 responses, so SQQ + LBH + shizun mini get the green light. Hopefully we can get more interest in the others too 🙏

A photo of two folding fan enamel pins on a dyed fabric background. Both pins have grey ribs and black fill, with white screenprinted sparkles over the black. The top fan has a magnetised cat's eye effect that forms a bow shape in blue and purple, and the bottom fan has a reverse gradient from bottom to top, from dark teal to black.

The same pins photographed at a lower angle to show the colour shifting properties of cat's eye. The bow in the top pin appears magenta, and the gradient in the bottom pin appears a deeper blue.

Reminder that the in-hand drop is THIS weekend! Listings go live in 48 hours~

Feb 22nd 10am AEDT (Sunday)

The cat's eye fans were a lot of fun to design and also to sample with my manu, they really went above and beyond getting the effects just right :D

#enamelpins

A custom P10 ball-jointed doll Kim Soleum in a black suit with a white shirt, black tie and black shoes, looking at the viewer with spirals in his eyes. A 1/2 scale grey model hand is sitting on his head, fingers curled down.

A side angle of the same Kim Soleum doll, showing how the scale hand grips onto his head. In the background there are a spare face plate and an instruction booklet for the doll body.

look at me

A custom P10 ball-jointed doll Kim Soleum as Agent Grapes in black pants, a white shirt, black tie, black boots, and a Disaster Management Bureau blue jacket. He has rectangular glasses on and his face plate is a pained expression crying big teardrops. He is held up by a 1/2 scale grey model hand grabbing him from behind.

I'm bullying grapes

#gsgw #gdcg #괴담출근

A cropped screenshot of a drop-down list that lists six countries: Australia, Canada, China, Indonesia, Japan, Mexico.

A cropped screenshot of a drop-down list that lists six countries: New Zealand, Philippines, Singapore, South Korea, Taiwan, United States.

These are the destinations currently enabled based on order history and/or proximity to AU 🙇

UK/EU are not enabled, but I can take direct personal orders if you're fine with VAT not being prepaid, so pls contact me ahead of the drop!

For other regions, pls also lmk and I'll check if I can add o7

Buddy orders are welcome to save on shipping costs, but please please make sure you contact me ASAP after you order specifying the number of people joining! Larger orders may require additional shipping costs.

Some P4P items will have quantity limits, but I'll post about those separately soon o7

I will also have a few of each new design set aside for backups, so what gets listed will be most but not all of the stock. If any fellow makers want to trade wares, hmu!

Please note that stock per grade is limited; some grades are not available for certain designs. I will consider restocking the regular (non-P4P) designs in the future if they sell out quickly, though only if there is enough interest.

A photo of five pins in two lines, each one shaped like a symmetrical folding fan. The fans are themed after light and dark contrast: the top two fans have plum blossom screenprint with red blossoms, left being a blue enamel fill and right being black fill. The bottom line has two fans covered in blood splatters, one white to the left and one black to the right, and between them is a fan with pale grey fill. The background is floral and a real folding fan with bees and flowers sits below them.

A photo of three pins in a line, each one shaped like a symmetrical folding fan. The fans are themed after nature and the elements: on the left is a green fan with bamboo, in the middle is a teal fan with the traditional character for "wind", and on the right is a purple and blue fan with the character for "water". The background is floral and a real folding fan with bees and flowers sits below them.

The time is near!!

In-hand leftovers of the folding fans and mini pins will be dropping next weekend, including the dyadic and elemental fans :D

hellion04.myshopify.com
→ Listings will go live Sunday Feb 22nd 10am AEDT

(pls check the conversion to your local timezone)

#enamelpins

A photo of a handmade charm keychain on a black and white tile background. The charm has a pink clasp, two main dangles, one short with a black and yellow smiley bead, the other with a larger golden bead, yellow and pink flower bead, and a tiny bell, all suspended from a long piece of thin chain. There is also a golden star between the two dangle pieces. Next to the charm is a yellow smiley face sticker with a gold border.

A photo of two yellow smiley stickers on a black and white tile background. Both stickers are identical: they are smiling emoticons with a reflective gold border.

New merch unlocked! A salesperson's best friend :)

I made some dangly charms to hand out at local cons and I have a couple leftover, so I thought I'd list the last ones in my next in-hand update, planned for Feb 22nd

I'll also have lots of smiley stickers available~

#gsgw #gdcg #괴담출근

SHDHSHDS YAA that's the goal!!

Skinzun & skinhe are a pipe dream rn but I hope they get enough interest 😭 even if they don't mb I'll self-fund them anyways bc I need more cursed SV pins out there LMAO

As always, GOs for regions outside Australia will be welcome!

I'll also be including a bonus for those who fill out the form and follow through with ordering during POs, as a lil incentive~

Slots will be capped when it comes time to PO after samples are complete, but I'll try my best to meet demand according to the IC responses. If there is sufficient interest but not much more than that, less slots will be available.

Quotes are in AUD, with a rough USD conversion for reference.

A collage of 12 enamel pin designs on a black grid background with a handwritten title reading "interest check" in capital letters. Further down the page in the bottom left are a note that reads "feb 08 ~ 22" also in capital letters and "form open" in semi-cursive lower case. The six top designs are danmei characters, all with gold plating: Hua Cheng, skinzun Shen Qingqiu holding a baby Luo Binghe creature, Xie Lian, Shen Qingqiu, Luo Binghe, and Liu Qingge. Below that are two mini pins that both read "shizun" in capital letters, with gold and silver plating respectively. The last pins in the bottom right are two sets of eldritch angel cats: a cat with a halo and six wings exposing an eye and teeth on its tummy, and a striped cat with four wings and a halo with tentacles walking sideways eyeing the viewer. Both cats have two colour variants: a ginger six-winged cat with a yellow halo, a light grey six-winged cat with a red halo, a grey four-winged cat with orange wings/stripes, and a black four-winged cat with red wings/stripes.

Interest check for new pins is up!!

Only designs that get sufficient interest will move on to art proofing & sampling, so shares are very much appreciated to spread the word 🥺🙏

forms.gle/MdbXqKdqecRP...

I'm super keen to bring some of these to life finallyyy

#svsss #skinzun #tgcf #eldritchangels

Ope good point, I may be stoopid 😭 that does work LOL TYY

Oh yea ty! I did try using one on mobile when the verification first hit and it didn't work (still doesn't), but I forgot to try on desktop and it works just fine 😭 yay and also fml