New York City

Olympus XA
TX100

#filmphotography #nyc

Olympus XA!

Florida on 35mm

Olympus XP1
Very Expired Lomo Lady Gray.

#filmphotography

More of the film catch-up, I took the Lubitel to NYC and ran a film through it.

#lubitel #kentmere #filmphotography

Finally caught up on some film developing. Here’s four from Pensacola Beach, Florida.

#Lubitel #kentmere #filmphotography

If you double up the leader, put a few cm of paper from another film on the take-up reel with the film you’re loading it’ll prevent the overlap. The wind mechanism is meant for much thicker film than currently available. Glad you’re enjoying it!

Awesome! How was using it?

Stalactites.

Fuji GS645S wide 60
5 year old slightly fogged HP5 @ 1600

Magic happened today and images were successfully preserved.

Some old pinholes, Library of Congress, Washington DC

Leica M2
Pinhole Lens Cap
FP4

#pinholephotography #filmphotography

I had hoped to take some pinhole photos on world pinhole day, unfortunately it’s pouring with rain here. Instead, here are the first and second pinhole photos I took.

Speed Graphic
HP5

#filmphotography

The old Chain of Rocks Bridge, St Louis

Roll-Op II
HP5

#filmphotography

OK, duh, 24x18 is half frame.

Some interesting formats in the boxes of slides I found recently, 24x24mm and what appears to be 24x18mm I’ve never heard of a camera using that format in the 1950s and 60s.

NYC

Leica M2, 50mm Summicron
Probably HP5

#filmphotography

I still use running water for wash, but my water is cheap. I’m planning on retiring to a more expensive place in a couple of years so I’ll probably switch to the Ilford method then.

I agree with consistency, I count my inversions to make sure they’re the same film to film. I do also check the wash water temperature to make sure it’s about the same as the other chemicals, in summer it comes out of the ground the right temperature, in winter I have to mix a little hot water in

Yep, and an unpopular opinion of mine, dev time and temp aren’t that critical, I dev at room temp, usually 22c/71.5f and to me the negs look just fine. 😁

MDC has always worked for me, that 12 minutes has worked on a few films this year, on a different film this shot was exposed correctly for iso 1600, 1/30 @ f4.5 if I remember correctly, the dev time looks pretty good to me.

12 minutes according to my app?

My app shows 12 minutes?

I use the Massive Dev Chart times, it gives 12 minutes for Kentmere 400 @ 1600 and that seems about right, this is the 4th film I’ve shot at that speed and the negs always look good. I have this on 14 minutes but another couple wouldn’t have hurt.

French fashion of the 1920s. St Louis Art Museum

Lubitel 166U
Kentmere 400 @ 1600 and a bit.
HC-110b

I gave the film an extra 2 minutes development, it could have used more, although I’m not at all unhappy with what I got.

#filmphotography

Cars of the 1920s, St Louis Art Museum

Lubitel 166U
Kentmere 400 @ 1600 and a bit

#filmphotography

No matter how often I do this, it’s always a relief to see images.

#filmphotography

I don’t, it’s not my design to sell, I downloaded the files.

Just completed project, 3D printed 6x18 pinhole camera.

#filmphotography.

I found these at a local thrift store today, someone had already bought three of them, I got the rest. It’s going to take a while to scan them!

#foundfilm

Shadows

Zenit E
Fomapan

#filmphotography

Nice, the governors house on Alcatraz?