front-side view of a MG Gelgoog's head, painted up in Pro Acryl paints exclusively, Bright Warm Grey with Burnt Red secondary colors. light chipping across the model done with Bright Warm Grey mixed with Bold Titanium White, with deeper grooves of chipping done in Warm Grey a pin oil wash was done with Abteilung 502 Starship Filth
ok quick lil oil wash thank u goodbye 🤍
Lol rear end looks shrivelled, but at least figma girls can shoulder the gun properly.
#figma
#littlearmory
Next up, Pancor Jackhammer.
Buttstock/magazine too big, collides with figma body so I made a shrunken, swappable part.
#figma
#littlearmory
Extended the ankles by 2mm so now the lower half with the thigh extension makes it 5mm longer than the normal Doga
GM Cold District is almost done! All that’s really left is the waist armor since it’s just a background element for the diorama. But hey I might make a full body some time!
actually surprised myself with how this is looking already
From editing mines comes the HG Kampfer! I love this design and I love this kit. It has only a few flaws and if not for the ball joint hips, it would be perfect. I took a lot of photos, so the full set is on Instagram if you'd like to see em all~
www.instagram.com/p/DTbMFKhDnQ...
#gunpla #ガンプラ
sometimes you just want to model a building from your favorite box art and make it real. that’s a thing you can just do.
I can officially say the Huglion “Beacon” MT kit is ready for print! All sections have been formatted for assembly. The longest thing was the legs. It’s such a strange shape, and the ankle section was very tough. We’ll see how it holds up after print! #アーマードコア
This is a brush-painted model of a modified Requiem for Revenge Zaku
Besides the colour scheme, changes were done to further align it to the traditional Zaku.
Since I'm a total newb at scale painting, I followed the painting workflow of professional modeler Shimizu Kei
#ガンプラ #gunpla #Gundam
Dusted out my old HGUC Dom for a photo.
I really hope to build this guy again but I can’t stand that odd bump on its shoulder armor. This guy I actually swapped in the no-grade kit’s shoulder, and you may know how hard those to come by nowadays.
Chipping done, I revisted the stripe on the shield because it felt a little awkward. Then gave it a semi-gloss coat to seal everything in
Washed everything in ground brown and it finally started to look complete☺️
#ガンプラ #gunpla #Gundam
Here's my general colour scheme.
Still working on detailing > weathering > topcoat.
Used reflective decorative tape for the eye camera.
Pilot figure is a 1/32 gacha toy.
Had my eyes on this design for awhile now, finally printed it back in November.
Joints need m3 nuts and bolts and some DIY (I put tape for extra friction)
All thanks go to @lewisrk.bsky.social Get yours here!! buymeacoffee.com/rattapoomk/a...
The new APCs look so good! I’m actually surprised the bumpers look so good??
Went to 20mm for the length. While I would love them to be smaller I’m overjoyed at how they look now.
Might throw these up on Patreon for the $5 tier. Printing the building next!
My latest obsession - 3d modelling rare/obscure/oddball firearms and 3d printing for my figma gals.
#figma
Almost complete pics, just needs topcoat.
Lessons learned:
- soldering iron to weld parts together
- puttying surface of a 3d print at small scale is REALLY hard, requires godly patience (I experimented and failed)
#figma
WIP pics. Back in September, printed this Hardy Daytona model from www.printables.com/model/1272597-dummy-13-hardy-daytona.
Scaled it up like 11% to look more beefy with figma girls riding it
#figma
the torso and head of the Gundam Artifact GM (Thunderbolt), held up on a pterodactyl clip. painted in citadel the fang, corax white, and monument hobbies golden brown, before being topcoated with tamiya clear gloss, then given an oil wash with abteilung 502 starship filth
life's been stupid hectic but i've been keeping my hands busy finally getting around to my gundam artifact miniatures, starting with the GM from thunderbolt 💜 been tryna base the color scheme off the HG gunpla's box art!
Live footage from deep in the Arachnid Containment Zone!
🦅Would you like to know more?_
#hexagear
Now that I have idea of the scale of the raw STL files, I plan to scale up to around 1:12 for my figma girls to fight them 🤓
🦅Would you like to know more?_
Hijacked the 3d printer at work over the course of a week to print out this Arachnid Warrior to test out the scale (STL from here: thingiverse.com/thing:1064619)
It's kinda 1:24 scale, looks good next to hexagear
HG Thunderbolt Ball, painted in canon colors and panel lined using Abteilung 502 Starship Filth!
HG Thunderbolt Ball, painted in canon colors and panel lined using Abteilung 502 Starship Filth!
HG Thunderbolt Ball, painted in canon colors and panel lined using Abteilung 502 Starship Filth!
the body's finally got decals, panel lined and lightly weathered 💜🤍 unfortunately due to some rough tumbles some of the paint's been rubbed off in a few areas, which i can just fix later .. but i'm happy with how it came out!
tried to go a lil less hard on all the weathering for this one
A picture of a hobby desk, the mangled parts of a HG Leo seen strewn about. Likely the leftovers of some horrid battle, or a stupid twink trying very hard to make their silly ideas work One of the red cheek fins of the HG Leo can be seen, with strips of white plastic sticking off of it. The fins were sanded down flat and were covered by 4 bands of white plastic
A picture of a hobby desk, the mangled parts of a HG Leo seen strewn about. Likely the leftovers of some horrid battle, or a stupid twink trying very hard to make their silly ideas work One of the red cheek fins of the HG Leo can be seen, with strips of white plastic sticking off of it. The fins were sanded down flat and were covered by 4 bands of white plastic
re: my trans enby pride Leo
how do i take the originally 5-banded red cheek vents and turn them into 4 (to make room for the 4 non-binary pride colors)?
some thin strips of plastic i bought weeks ago that just happened to be the perfect size!
sanded the red part down flat n tamiya cemented it all
Head of the HG Leo, painted with trans and non-binary pride colors and weathered slightly
Head of the HG Leo, painted with trans and non-binary pride colors and weathered slightly
Head of the HG Leo, painted with trans and non-binary pride colors and weathered slightly
Head of the HG Leo, painted with trans and non-binary pride colors and weathered slightly
and the head's done!
🏳️⚧️
💛🤍💜🖤
Cutting the leg joints out so it can be directly inserted into the polycaps rather than the sandwiching method
This was done just to clean the seams on the bellbottoms :'). It looks messy but the rear is still intact so it wouldn't be that noticeable
