Will have a look at it

TAL Software GmbH VST3, Audio Unit, AAX, CLAP audio plug-ins for macOS, Windows and Linux

Still remember TAL-Bitcrusher?

tal-software.com/products/tal...

There is a video on the product page that compares some sounds with the hardware.

TAL Software GmbH VST3, Audio Unit, AAX, CLAP audio plug-ins for macOS, Windows and Linux

The TAL-J-8X is finally here! An 80s synthesizer emulation with a fresh, modern touch :)

tal-software.com/products/tal...

TAL Software GmbH VST3, Audio Unit, AAX, CLAP audio plug-ins for macOS, Windows and Linux

TAL made a new thing btw.
I made presets for that thing btw.
It's here, and it's good btw:
tal-software.com/products/tal...
@tal-software.com

The JX-8P

Nice view of the voice modules:

Looks like some components don't like heat anymore. Keeping the panel and the window open fixes the tuning problem as a quick fix. Not sure how I can handle this in the summer. Definitely needs a service... :)

Switched on today and the problem happens again. DCO 2 at highest range 2' (accidentally wrote 16' in the last message) is out of tune.

Haha, that's exactly what I was afraid of. Luckily, it was just a hardware glitch. When I turned on the hardware today, it was working as expected :)

It was a glitch :) Switched the device on today, and all was in perfect tune. Hope it does not happen again.

To all Roland JX-8P owners: Is your device tuning also off with +17 cents for DCO2 and Range at max 16'?

I don't get it, why this happens on my hardware... All is perfectly in tune. DCO1 and DCO2, only DCO2 range 16' is out of tune.

Thanks for offering your help. All goot at the moment. It looks like our JX-8P works as expected.

How to RECREATE Nightcall by Kavinsky in 4mins YouTube video by JUSTESSE | Sample Packs

Deconstructing NIGHTCALL by Kavinsky in 4mins:

www.youtube.com/watch?v=RrS9...

The Key Follow value 83 should follow the pitch 100%. It works. I found that my filter cutoff is probably slightly detuned between voices.
Could not find any service instructions for the cutoff calibration process so far.

It is surprising how different Roland's vintage synthesizer models are.

The filter key-follow on the JX-8P does not follow MIDI notes below 24.
In addition, the frequency scaling is slightly off, and the filter key-follow is inaccurate. At least on my model.

Can anyone confirm this?

Thanks. I made a note about it. Good input.

Thinking about a TAL-Drum user request where you can set a negative delay for the mapping. Trigger the sample earlier. This introduces latency that we would report to the DAW. We would also show the trigger point in the waveform view of that mapping.

What do you think about this? Is this useful?

TAL-U-NO-LX: The Best Juno-60 Synth Plugin Just Got Better (iPad, Mac, Windows, Linux, MPE Update) YouTube video by Gavinski’s Tutorials

The new MPE settings are also available in the desktop version and our other synth products, ensuring compatibility with many more MPE hardware controllers, such as the Osmose.
www.youtube.com/watch?v=2wsS...

TAL EQ YouTube video by TAL Software

youtu.be/i2xQ3ftgHtw?...

TAL-EQ is finally here:
tal-software.com/products/tal...

So true. Cute little plastic boxes they are :) ...but with an incredible sound. The tuning problem when touching the synth near the power button is a common issue. Cleaning the metal contacts inside of the button solves the issue.

SH 101 back from service. Power button detuning problem fixed and bender vco fader replaced :) thanks to the synthorama guy!

Every 8th key no longer worked. Same when triggered through MIDI. Disconnecting and reconnecting the MIDI KIT connection bus cable solved the problem. I am glad the fix was that easy :)

This is how the Jupiter 8 with MIDI extension looks from the inside

#vst #fx #reverb
TAL-G-VERB updated to v2.
such a good combo: reverb + granular + eq.
( eq is a must use because the verb is so dense )
very good for deep soundscapes.

do check it!
tal-software.com/products/tal...

thanks Patrick of @tal-software.com
I use many of your plugs:) (sampler etc)

TAL-G-Verb YouTube video by TAL Software

We have updated TAL-G-Verb to version 2:

tal-software.com/products/tal...

youtu.be/sSUNLBPAWLw

Today is the last day you can use the newsletter discount code to save 25% off my Koda and Fenix soundsets for @tal-software.com's amazing TAL-Pha synth.

www.theunfinished.co.uk

#synth #composer #producer

Here are a pair of very nice soundsets for @tal-software.com TAL-Pha from super talented sound designer The Unfinished. If "widescreen techno" and "analogue noir" sound like your kind of sound, definitely check this out!