Which #epoxy is best for my application?

Refer to our product matrix for 'Single Fiber, Single Mode and Multimode Terminations' to review epoxy properties that will support your specific application: https://bit.ly/4rfnKja

#FiberOpticCenter #AskFOC #adhesive #adhesives #fibertermination

What are the most common issues regarding APC #polishing geometry?

Learn more in our article 'APC Polishing Advice to Improve Apex Offset and Angle Measurements': https://bit.ly/3MIukAI

#FiberOpticCenter #AskFOC #fiberopticpolishing #fiberoptics #cableassembly #connectors

Can objects contact the bottom or sidewalls of an #ultrasonicbath when cleaning polishing fixtures?

Short answer: No. Contact will reduce their movement and thus reduce the cavitation effect.

Learn more in our blog: https://bit.ly/49VBKYL

#FiberOpticCenter #AskFOC #UltrasonicCleaner

After crimping, is the cable assembly able to handle pulling on the cable?

When done correctly, a proper crimp provides the strength needed to withstand pulling during the final production stages and installation.

Learn more: https://bit.ly/4f43HyD

#FiberOpticCenter #AskFOC #Crimping #connector