EDIABAS RPLUS ICOM Configuration How-To Guide This resource is a pure how-to guide that explains how to configure a second standalone EDIABAS installation to use RPLUS mode with a BMW ICOM interface. There are no downloads in this resource: all s...

EDIABAS RPLUS ICOM configuration guide – explains how to clone the ISTA EDIABAS 7.6.0 C:\EC-APPS\EDIABAS setup, switch to RPLUS:ICOM_P and set the correct REMOTEHOST IP so INPA and Tool32 can use ICOM reliably.

binunlock.com/resources/ed...

#BMW #EDIABAS #ICOM #BMWCoding #BMWWorkshop #INPA #Tool32

BMW ZGW and NBT MGU SSH Port Forwarding Utility This small utility is designed for BMW Ethernet based diagnostic and coding setups where you need to forward ZGW and NBT or MGU SSH IPs quickly. When the tool runs it closes any other TCP or UDP conne...

BMW ZGW and NBT/MGU SSH Port Forwarding Utility – small Windows helper that sets up a clean SSH tunnel to BMW head units via ENET or ICOM, closing other sessions on ports 22/6801/6811 to avoid conflicts during coding
binunlock.com/resources/bm...

#BMW #BMWHU #NBTEvo #BMWMGU #BMWCoding #ENET #ICOM

BMW HU Engineering Tool for CIC NBT EVO BMW HU Tool v2.6.PRE is a workshop utility for working with BMW CIC, NBT and EVO head units on E, F and G series vehicles. It focuses on managing FSC and SWT data, preparing USB based update projects ...

BMW HU Engineering Tool for CIC, NBT and NBT EVO – a focused head-unit engineering utility for E/F/G series that handles FSC/SWT management, USB map/update projects and basic diagnostics alongside your usual EDIABAS/ESYS.

binunlock.com/resources/bm...

#BMW #BMWHU #CIC #NBT #NBTEvo #BMWCoding