Advertisement · 728 × 90
#
Hashtag
#KiriBlenderJam
Advertisement · 728 × 90
A very slightly pixelated low poly cave with stretched textures. The single major light source shines slightly to the left from the camera's perspective. It isn't very strong, so the area uncovered by complete darkness is limited. There's a railway going through the cave and robotic claws hang from the ceiling, everything is covered in rust. Almost rectangular beams on both sides of the track and on the ceiling stop the passage from collapsing, there are also structures supporting the claws. One of them, the one closest to the camera, appears wider and has wires going beside it, it spots what looks like a panel with glowing red text. The text is unreadable due to the image being in low resolution. There are also wires on far left upper side of the cave. They span the entire way and are connected to small boxes with 2 lights each, one red, on the upper half, and one green a little bit lower.

A very slightly pixelated low poly cave with stretched textures. The single major light source shines slightly to the left from the camera's perspective. It isn't very strong, so the area uncovered by complete darkness is limited. There's a railway going through the cave and robotic claws hang from the ceiling, everything is covered in rust. Almost rectangular beams on both sides of the track and on the ceiling stop the passage from collapsing, there are also structures supporting the claws. One of them, the one closest to the camera, appears wider and has wires going beside it, it spots what looks like a panel with glowing red text. The text is unreadable due to the image being in low resolution. There are also wires on far left upper side of the cave. They span the entire way and are connected to small boxes with 2 lights each, one red, on the upper half, and one green a little bit lower.

Finished my work for #KiriBlenderJam. It's inspired by industrial and breakcore album covers.The theme was "robot" so I looked at various types of robots and found a video of one using it's claw to move blocks into a tower and then disassembling it. So I based the claw's design on it #Blender #3Dart

1 0 0 0
Post image

Got second place at the #KiriBlenderJam with my delightfully terrifying skeleton pic! Let’s goooo!

#blender #blenderart #3dart #3dmodeling #littlevictory #smallvictory #letsgo #happyfriday

(Link to jam: itch.io/jam/-3d-mode...)

2 0 0 0
Post image

Just finished up my submission for the #kiriblenderjam . Meet Kamen Rider EDGE//ZERO. Any feedback would be greatly appreciated!

#3dart #3dmodeling #characterdesign
#cyberpunk #kamenrider #IndieGameDev #3DCharacter #Tokusatsu #3drender

5 0 1 0