Two mechs of different sizes, both with cylinder-shaped bodies, walk past a small factory.

The smaller one, shown from the opposite side. It has two emblems on the hull: - number 123, white on red - and some small rodent with long tail, black on white The cylinder itself is painted in a very messy camouflage, pale blue, dirty yellow, dull orange and a bit of grey.

View from the back. A door on its side, with stepladder below, can be seen.

A second, smaller cylinder walker.

Aside from the gun, fully scratchbuilt.

#miniaturepainting

A top-down view of a diorama board - symmetrical arrangement. Central block of two levels with staircases, connected by bridges with the two triangular sections in the opposite corners. The ground level is partially snowed and flooded.

I had this 6mm Necropolis board, and the horrible water effects (why even use them??? Gloss varnish does the job!) turned into gross white thing.
I touched it up and masked it with snow (and gloss varnish).

It is up for sale.

#necropolis28

A group of tiny Ancient Greek houses with white walls and red roofs. There is a bronze statue of a Hoplite next to one.

View from another angle.

Another angle yet, showing little fences between the houses.

Photo with a giant mech for comparison.

Something that remained unfinished for years.
Lasercut houses from Iliada Game Studio.

#miniaturepainting #tabletopterrain

A pale wreckage of a mech, with a pilot in bright orange clothes standing next to it.

View from the other side.

The same wreck, with a little black mech standing next to it. The mech consists of backward legs, clunky body, and a large cannon attached to its side.

View from the back.

Some more of this.
A wreck with a pilot, and another tiny mech with scratchbuilt legs.

#miniaturepainting

A group of three mechs of very different sizes, all black, all with chicken legs.

The smallest, shown separately from behind. It consists of a large rocket system on spindly legs, with a cockpit in front and a red barrel in the back. There is a step ladder on one thigh.

Another tiny mech - this time, on scratchbuilt legs.

#miniaturepainting

A bunch of scenery pieces, grouped together. Broken hills at the forefront, then concrete fence, and then futuristic ruins.

Finished the ruined building in the background.
This is now bundled for sale.
ko-fi.com/s/f0a10aa233


#tabletopterrain

A black mech with a glowing red sword. It has reverse knees, no head, and two cannons embedded into its shoulders. It has tiny glowing bits all around. There is a concrete wall behind it, and a base with super-tiny figures wearing black.

View from the back. In the other hand, it holds an appropriately-sized rifle.

This one is intended to represent the people behind this wall.

Simple kitbash, using a 3d printed Battletech figure and resin cast Infinity arms.
Tiny people next to it, are way more converted (I sculpted capes on two of them).

#miniaturepainting #flamesoforion

Two orange mechs, heavy bodies with small arms in front holding a gun. There is a base of tiny infantry figures next to them. The mechs are about 15m tall.

View from the left. The right mech rests its left foot on a massive broken head of a statue. It has a decal of playing cards, and "SALLY" written next to it.

View from the back. Both have a number written on the right side. There is a teal cable going to the arm from the back.

And now, to my very first Battletech models.
These are 3d-printed (not by me) and converted.

#miniaturepainting

Top-down view of a broken hill, dark slabs of rock with some sand and a broken asphalt road over it. The road is wide, with at least four lanes still present.

View from the front - where the hill abruptly ends. A small group of tiny people are present for scale.

View from a side, to show the rocky outcrop. The tiny soldiers are now climbing the mountain.

First attempt at a 6mm hill.
Very messy build, saved entirely by painting.
Going for a landscape traversable by a mech, but not a car.

#tabletopterrain

Two identical black mechs in different poses.

Most imperial pilots don't know (because they didn't read the manual), but it is actually "Doru II".

#miniaturepainting #gunpla

A giant robot, painted white red and blue with yellow accents, is perched crouching on some rusted machinery.

View from the left. Its body is an exposed spine, with blue armour plates in the front. The head, resembling an animal skull, has a glowing red eye.

View from the back. A bit blurry.

A size comparison photo with imperial grunt mech Doru. Ancyor is almost as tall, despite its crouching pose.

The messy pinnacle of this project: Heroic Robot Ancyor from @kallidorarho.bsky.social WARHOUND.
It ended up being -very- different from what I initially thought to make, but it is here and it is done.

#miniaturepainting #gunpla

A ramshackle mech with guns for arms - robot legs, cockpit with a helicopter-style window, and a large billowing cape, like an Old West gunslinger about to shoot.

View from the back.

Group photo with two other mechs. It is about 10 meters tall.

Another Rebel mech, cobbled together from unrelated components.
The upper half is from @thelazyforger.bsky.social , with sculpted cockpit window.
The legs from out of production metal Dark Age mini.

#miniatures

Four small mechs, pale blue, with open cockpit in front. They have bulky arms with greebled surfaces, and a lot more weapons than they should.

View from the right. This arm holds a large cannon.

View from the back. Both arms have a pair of cables connecting them to the back.

Finally got these finished. They've been collecing dust on my desk for years (I remember being intimidated by the level of detail).
I believe these are from @thelazyforger.bsky.social ?

#miniaturepainting

Full Spectrum Dominance - Swarm Mode Campaign - MyMiniFactory Discover and buy objects from Full Spectrum Dominance - Swarm Mode campaign.

www.myminifactory.com/frontier/ful...
The Lazy Forger does his name a disservice because he's figured out how to make a solid bit of solo/co-op rules for a 6mm scale game.
#Tabletop #Scifi #6mmScale #MyMiniFactory

A painted model of a futuristic ruin - two square pillars of concrete topped with houses, connected with pipes and bridges.. Everything is grey and weathered.

View from the opposite side.

Another 6mm structure.
This time inspired largely by Girls' Last Tour.

A very large, red mech with a sleek armored silhouette. It has glowing blue eyes and golden antlers. It rests left hand on a giant double axe, and is pointing somewhere with the other.

View from the left. There are black and yellow hazard stripes in places.

View from the back.

A photo of the mech surrounded by concrete buildings from a few posts back. They barely reach its waist.

And we are back to 6mm stuff with this giant mech.
Base model - largely unconvenrted Titan Greatsword Tristan from SNAA.

For sale:
ko-fi.com/s/b65990aae4

Concrete house of a complex shape. Vertical row of windows in the middle, left wing with simplistic square holes, and the right wing with vertical slits.

View from the other side. This side of the left wing is flat concrete all the way, with a door at the bottom and a large white 01 near the top. The middle section extends back, with a row of simple square holes in rectangular panels.

View from yet another side. The right wing looks identical on this side. The middle section has a door.

A group photo with previous two buildings. All of them are roughly the same height.

A third 6mm house. Experiment in mixing casts with carving.
Several elements inspired by @lettuces.bsky.social paper buildings.

A painted model of a grey concrete building, about 8 storeys tall. It has an orange "70" near the top on a flat empty wall.

View from the opposite side. Same window galleries, same flat wall, a tiny door at the very bottom.

A group photo with the previous building. The new one is shaped as a square pillar, and is a little taller.

Second test piece.
The greeble on top is from StratoMinis.

Four tiny bases of painted 6mm soldiers - three per base, each group in a shallow crater, with some yellow cases scattered about. They have glowing red visors.

View from above, showing the figures themselves more clearly.

Today I dug out a small forgotten box with 6mm stuff from (now defunct) StratoMinis.

These 20mm circles with anti-tank teams on them, are all single-piece casts - impressive feat of manufactured convenience.

Given the busy scenics, it was quite hard to make the figures stand out.

A simple concrete building, with long horizontal galleries of dark shadow.

The other side of the building, with just three such galleries in the middle section, and flat concrete walls on each side. There are entrances at either end, and a large white 01 near the top.

Photo of the same building next to a large (18m tall) mech. The mech is almost as tall as this 7-story house.

Getting back to 6mm scale.
Test piece for a "simplified" architecture project.
Thinking of all those houses in the background of videogames that you're not expected to go inside of.

18m tall mech for scale.

Bit more done on this Mech for #flamesoforion

#postapocalypse #postapocalyptic #battletech #6mmscale #wargaming #wargamesminiature #hbynrd #hobbynerd #grindark #mech #mecha #clowndark

Mech WIP for #flamesoforion

#postapocalypse #postapocalyptic #battletech #6mmscale #wargaming #wargamesminiature #hbynrd #hobbynerd #grindark #mech #mecha #clowndark

A large cathedral, consisting of two wide spires, mounted on tracks, with a bulldozer shield in front.

View from the back.

Something from a long time ago (2020) - tracked cathedral in 6mm.
Its base is 170mm long.
#miniaturepainting #epic40k #6mmscale #adeptustitanicus #mortalengines

My second step towards a scab boat for #scabz and/or #swill (the first one was a lunch of herring in mustard sauce...), a 1/5 scale (or #6mmscale, respectively) papermodel of the thing I have in mind.

#miniaturepainting

3mm scale tanks designed in Plasticity 3D

3D printed tank designed in Plasticity 3D

Version 1 of my little tanks given a quick paint job. I’m currently on Version 4.

Version 1 of my little tanks given a quick paint job. I’m currently on Version 4.

I’m designing a line of 3mm scale tanks and terrain for use in tabletop wargames like Full Spectrum Dominance, Laserstorm, Microcosmic. These tanks are modeling in Plasticity 3D and rendered using Nomad Sculpt

#plasticity3D #Nomadsculpt #3Dprinting #3mmwargaming #3mmScale #6mmwargaming #6mmscale

A small model of a residential building vaguely inspired by Japanese architecture. It has brick walls on the first floor, and balcony windows for the rest, separated by tall concrete columns. The roof comes in two separate halves, slanted to each side, on different levels. There are some advertisement banners on top.

A side view of a flat wall, with a large mural of a heroic factory worker.

View of the other side of the building. A yellow gas pipe goes around it above the first floor, and there are various vending machines or ATMs next to it, as well as graffiti. It's really small - the whole 4-5 story building is about 5cm tall.

View of the other flat wall, with more yellow pipes.

A scratchbuilt building in 6mm scale, from back in 2022.
#miniatures #tabletopterrain #6mmscale #inq6

Some 6mm-scale tanks painted way back in 2020-2021 - sculpted by @tim-popelier.com , who apparently has an account here.
#6mmscale #inq6 #grimdark #miniatures

I really have a weakspot for tiny #minatures.
Working on my own Leviathan box!
Using the NetEA system for Epic #40k

#wargames
#wargaming
#painting
#art
#games
#warhammer
#6mmscale