Front left view of the Phaser prop replica.

Rear right view of the Phaser prop replica. High angle.

Phaser prop replica laying on it's right side. View from above.

Phaser prop replica laying on it's right side. View from below.

More angles of the Star Trek TOS Type-2 phaser prop replica.

Being mostly wood in structure, it has a nice heft to it.
There was also a lot of sanding to get the smooth shapes and surfaces.

#StarTrek
#PropReplica
#ScratchBuilt
#Phaser
#Type2Phaser
#DrH

Right side of the flying Kroot miniature.

Rear right view, high angle, of the flying Kroot miniature.

Front view, high angle, of the flying Kroot miniature.

Left front view of the flying Kroot miniature.

Extra views of the flying Kroot.

The wings are made of 4 layers (to give the layers of feathers) of epoxy putty over a wire and tissue/PVA base.

I referenced a variety of bird of prey for the shape and colouration. With a splash of artistic licence.

#Warhammer40k
#Kroot
#FlyingKroot
#DrH

Right side of the modified Wave Serpent.

Close-up of the left side engine and hatch of the modified Wave Serpent.

High angle view of the modified Wave Serpent. The turret is rotated and the gun elevated.

Close-ups of the Wave Serpent turret showing rotation and elevation.

More from the modified Wave Serpent.

As I rebuilt the engine intakes I noticed a section of the hull that could become an engine access hatch. So I cut away the section, scratch-built engines into the interior space and then created hinges to make the hatches.

On […]

[Original post on dice.camp]

Front left of the Deinobot model.

Rear right of the Deinobot model. High angle photo.

Rear left of the Deinobot model. Low angle.

Front view of the Deinobot model, as if it's about to attack you.

Additional angles of the Deinobot.

On the shoulders are 2 40k Wave Serpent energy spines,
The "eye" on the head is from a 40k Tau kit,
Around the waist are some Space Marine vehicle vents, A smoke launcher sits between the hips behind these,
Between the legs is a […]

[Original post on dice.camp]

🚨 Nouveau numéro de La Gazette des Communes !
🗓️ Semaine du 16 au 22 mars 2026
🧠 #DRH sous pression, 👶 Protection de l’enfance, 💰 Responsabilité financière des gestionnaires publics, ⚡ Des maires séduits par le nucléaire, 🏥 Déserts médicaux... gazette-pvgpsla6.lagazettedescommunes.com/fr/pvPageH5B...

Low angle photo of the UFO abduction diorama.

UFO abduction diorama with red internal lights on.

UFO abduction diorama, rear of cow view.

UFO abduction diorama low light photo to show the tractor beam light.

Some more views of the UFO abduction diorama.

It does amuse me that the UFO is barely large enough for a crew, let alone the addition of a full size (and likely upset) cow.

#UFO
#UFOAbduction
#ScaleModel
#Cow
#DrH

Message aux #drh

www.youtube.com/watch?v=-Hjh...

#Trévidy

High angle photo of the Noxious Blightbringer miniature.

Left side of the Noxious Blightbringer miniature.

Right side of the Noxious Blightbringer miniature.

Final shots of the Noxious Blightbringer.

#Warhammer40k
#WarhammerCommunity
#Nurgle
#Deathguard
#NoxiousBlightbringer
#DrH

Thorin Oakenshield / Goblin King diorama from the Goblin king end.

Thorin Oakenshield / Goblin King diorama side view.

A couple more angles of the Thorin Oakenshield / Goblin King diorama.

The majority of the lighting was painted with dry-brushing or over-brushing (same but a "wetter" brush).

#LotR
#TheHobbit
#ThorinOakenshield
#GoblinKing
#GoblinVsDwarf
#Diorama
#DrH

Various close-up angles of the middle section of the lightsabre prop. The raised extension of the trigger's hinge serves multiple purposes: A rod prevents the trigger lever from falling off. It also works as a trigger guard. And it is a stable stand for placing the prop on a surface for display.

Close up views of the lightsabre's grip and pommel.

Lightsabre prop held by a blue gloved hand. Top: lightsabre off. Bottom: trigger depressed, lightsabre on.

The grip of the lightsabre prop is part of the pole that held a shower head. Being real metal means it polished up really well.

The trigger mechanism uses half a clip from a clothes hangar as a lever.
This pushes down a plastic rod "plunger" to depress a spring […]

[Original post on dice.camp]

Front of the N-gauge windmill. sails at ~30 degrees.

Front of the N-gauge windmill. sails at ~90 degrees.

Front of the N-gauge windmill. sails at ~60 degrees.

Proof that the sails of the repaired windmill do now move.

After decades of being glued in place, this windmill is free.

#NGauge
#Windmill
#Repair
#DrH

Front right of the Raider gunship conversion. Low angle.

Right side of the underside of the Raider gunship conversion.

Left side of the underside of the Raider gunship conversion.

Close up of under the nose of the Raider gunship conversion. Tracking camera pod clearly visible in the center.

The underside of the Raider gunship is painted blue to camouflage the (otherwise quite visible) aircraft from the ground.

The wings are adorned with weapons as with the helicopter gunships I took inspiration from.
The inspiration also led to the addition of an […]

[Original post on dice.camp]

DiamondRock hotel REIT more than doubles profit, redeems preferreds Net income rose 139.8% to $91.6M as DiamondRock refinanced its credit facility, repaid hotel mortgages and has no debt maturities until 2028.

#DRH DIAMONDROCK HOSPITALITY COMPANY REPORTS FOURTH QUARTER AND FULL YEAR 2025 RESULTS

www.stocktitan.net/news/DRH/diamondrock-hos...

Comment le tandem manager/DRH accompagne l’humain dans les organisations ?

Dans cette vidéo, Bernard Coulaty répond à plusieurs questions concernant ce tandem.

🎥 insights.ieseg.fr/resource-cen...

#Management #RH #DRH #Changement #Transformation #Leadership #Engagement #Organisation

Close up view of the front of the predator tank. Driver view hatch closed.

Close up view of the front of the predator tank. Driver view hatch open. A green-skinned pinup photo can be seen on the inside of the hatch.

Inside of the Predator tank before I enclosed it to build the exterior. Ork driver and Tyranid gunner are both wired into the controls.

As with the other hatches, the driver has a viewport for when they are not using the VR goggles and other sensors that are wired into their brain.

Having spent all of their time inside the tank, the Ork driver is now pale-skinned.

You also get a view of the 'nid […]

[Original post on dice.camp]

Surviving the Chaos: Innovative Strategies for Workforce Challenges in Construction This seminar featured insights on overcoming labor shortages and rising costs in the construction industry, emphasizing talent as an asset.

Surviving the Chaos: Innovative Strategies for Workforce Challenges in Construction #Japan #Tokyo #DRH #Human_Capital #JGBA

元ケイアイスター不動産専務が語る人的資本経営の最前線セミナー開催 建築業界の人手不足改善をテーマに、元ケイアイスター不動産専務が人的資本経営戦略について解説。55名の参加者が集結したセミナーの内容をご紹介します。

元ケイアイスター不動産専務が語る人的資本経営の最前線セミナー開催 #東京都 #港区 #人的資本経営 #ケイアイスター #DRH

建築業界の人手不足改善をテーマに、元ケイアイスター不動産専務が人的資本経営戦略について解説。55名の参加者が集結したセミナーの内容をご紹介します。

Photo of the train shed before I repaired and re-painted it.

Front right view of the N-gauge train shed.

Front view of the N-gauge train shed. Low angle.

A look at the front of the N-gauge train shed.

And a "before" photo to show where it started when I rescued it from a box.

#NGauge
#TrainShed
#ModelTrains
#DrH

Closer views of the Elrond figure.

Closer views of the Thranduil figure.

Close-ups of the figures in my Mirkwood BookNook.

Elrond visits Thranduil at his tree-inspired abode.

#LoTR
#Mirkwood
#BookNook
#Scratchbuilt
#DrH

Front left corner of the Refinery terrain piece.

Close up of the front left corner. A storage tank of some sort.

Left side of the Refinery with some vents and other details.

Some of the pipework above the Refinery.

Closer views of the front left corner of the "Refinery?".

Some cast pieces, combined with sprue and other junk, give this side some details.

#Scratchbuilt
#TabletopTerrain
#Refinery
#DrH

Ork Boy miniature (left), and the modified Ork Nob miniature (right). Front view.

Ork Boy miniature (left), and the modified Ork Nob miniature (right). Rear view.

Comparison shots of Ol' One Toof and a regular Ork boy.

Other than the Nob body, these mini's use the same basic pieces.
But the Nob has been re-posed and I bulked up his muscles.
And there's all the other additions, obviously.

#Warhammer40k
#WarhammerCommunity
#Ork
#OrkNob
#DrH

Blood Angels Terminator with powerfist and storm bolter.

Blood Angels Terminator with powerfist (in a fetching hazard-stripe patten) and storm bolter.

Two more of the Rescue Terminators.

One has a thing for large decorations; he came with the thing on one leg and the skull/reath on the powerfist. So I added the eagle/skull thing atop his armour.

The other has a classic hazard-striped powerfist and a cable […]

[Original post on dice.camp]

⭕UN HAUT CADRE DU MINISTÈRE DROGUAIT LE THÉ ET LE CAFÉ DE PLUS DE 250 FEMMES POUR LES CONTRAINDRE À URINER DEVANT LUI

#Christian_Nègre, ancien #DRH du ministère de la Culture, passé également par la direction des affaires culturelles du Grand Est, est accusé d’avoir drogué plus de 250 femmes.

View from the rear of the rooftop area of the Mech shop. With added scatter terrain.

View from the rear of the rooftop area of the Mech shop. High angle with no scatter terrain.

Closer view of the central garden that also houses the access to the workings of the shop's mechanical arms.

Closer views of the boxes behind the sign. Used for views over the sign with varying cover.

Views of the roof area of Mik's mech shop.

There's little cover at the rear with only a railing, but reasonable cover along the sides, and the huge billboard to hide behind at the front.

I placed two boxes against the sign that would allow views over it.
I also […]

[Original post on dice.camp]

Various angles of this plague marine.

Plague marine #2

Changed the position of the sword arm, rotating it outward to be more agressive.

And I added a mass of tentacles under the left arm.

#DeathGuard
#Nurgle
#PlagueMarines
#DrH
#Warhammer40k
#WarhammerCommunity

Rear right of the N-gauge train display base. with train.

Rear right of the N-gauge train display base. without train

Rear left of the N-gauge train display base. with train.

Rear left of the N-gauge train display base. without train.

Around the back of the N-gauge train display base.

The platform is a piece of plasticard and the brick pillars are plastic sprue, carved square with some lines scratched in.

Inspired by a small town platform I have passed many times.

#Modeltrains
#Scratchbuilt
#NGauge
#DisplayBase
#DrH

Front view of the N-gauge home.

Side view of the N-gauge home.

Scale photos of the N-gauge home. With a ruler showing centimetres and inches and with a 28mm scale miniature.

Final photos of my N-gauge home.

Complete with scale photos.
This whole model would sit easily within a 2x2x2 inch cube.

#Scratchbuilt
#ScaleModel
#NGauge
#Home
#DrH

Front view of the concept tractor model.

Right side of the concept tractor model. Low angle.

Underside of the concept tractor model.

Left side of the concept tractor model. Higher angle.

More views of the cartoon concept tractor model.

While the majority of the model is scratchbuilt, I did squeeze in a kit engine and transmission. Visible through the wheelarches and underneath.

#Scratchbuilt
#Concept
#CartoonConceptTractor
#Tractor
#DrH

Broken statue terrain piece.

The lower half of the broken statue.

Overview of the narrow path between the lower half of the broken statue and the plinth.

View along the narrow path towards the breached barricade.

The lower half of the broken statue rests on the cracked paving slabs, leaving a narrow path between itself and the plinth.

This was the entryway for the attackers who breached the wooden part of the barricade.

#TabletopTerrain
#WarhammerCommunity
#Cadia
#FallenStatue
#BrokenStatue
#DrH

Vanilla Pox walker miniature.

Modified Pox walker miniature.

The second pair of pox walkers.

Left is the vanilla miniature.

Right is the conversion; with added tentacles and arm-swaps removing the robo-arm and adding a tyranid arm.
And finished with some 3D-printing pen squiggles and putty.

#Warhammer40k
#Nugle
#DeathGuard
#PoxWalkers
#DrH