#Proxmark3 hashtag - Bluesky - nopzon.com

Bluesky Explorer

#

Hashtag

#Proxmark3

PhreakByte the Octopus

@nieldk.infosec.exchange.ap.brid.gy

5 hours ago

EMV simulation #chameleonultra , in the works . Working already is importing json file from a #proxmark3 scan. Would like to get scan working on CU aswell, maybe that will come in the next week or so. #rfid #hacking.
It’s already good enough for a PR, but I’ll try to make it even better.

0 0 0 0

PhreakByte the Octopus

@nieldk.infosec.exchange.ap.brid.gy

4 days ago

Original post on infosec.exchange

New blog #rfid #hacking

When debugging LF RFID protocols on the #ChameleonUltra, you often need to answer a basic question: is the field actually doing what the firmware thinks it is? For reader-talk-first protocols like #EM4305, the entire exchange depends on gap-encoded commands being sent […]

0 0 1 0

@lab401.bsky.social

1 week ago

Boost your HF auditing with the Proxmark 3 RDV4 Long Range HF Antenna Pack! 📡 Pre-tuned for peak performance, it extends read range up to 120mm. Includes both medium and long-range antennas. 🔐💻 l.lab401.com/FYaS3
#Proxmark3 #RFID #Pentesting #CyberSecurity #Lab401

1 1 0 0

@lab401.bsky.social

3 weeks ago

Portable RFID cloner built on Proxmark 3. iCopy-XS auto-detects, cracks, reads & writes most LF/HF badges—no PC needed. Save/export to 16GB storage. ⚡️ Get yours now: l.lab401.com/OdW66
#RFIDCloning #Lab401 #pentesting #icopyxs #Proxmark3 #Autoclone

0 0 0 0

@lab401.bsky.social

1 month ago

#Pentestips : adding keys to the iCopy-x

#Pentestips : adding keys to the iCopy-x This video will present you how to update the list of keys on the iCopyX, to read and crack the 1 Kilo RFID badge more efficiently. In this video we will quickly see how a standard 1-kilo badge works, then we will learn how to update the list of keys included in the iCopyX, and finally, we will see how faster the device is with this update. First, let's see quickly how a badge works. You can use the software HxD (https://mh-nexus.de/en/hxd/) or any other hexadecimal editor to view and edit your dumps. Inside the badge, you have a series of 16 sectors, each protected by 2 keys (Key A and Key B). In this example, these are the keys JcRhFw (4A 63 52 68 46 77) and SfSdLe (53 66 53 64 4C 65), and FF FF FF FF FF FF at the end of the badge. In order to read and write a specific sector, you need to know these keys. Please also note the very first line of the dump contains the UID of the badge. In this example, it is FA 7C 7B 3A. In order to make a duplicate, the iCopyX device can crack the unknown keys by various attacks, but the more keys you know upfront, the easiest and quickest it is to fully crack a badge. Here is the procedure to add new keys to your device: 1/Turn On the device 2/Navigate to PC-Mode 3/Connect the device to your PC via USB 4/Wait a few seconds that your computer installs a few drivers 5/Press Start on your device (either of the top 2 buttons) 6/Wait for the device to connect to the computer, after a few seconds, you will have a new Disk (ICOPY-X) on My Computer. Open that disk. 7/Open folder "keys" and then "mf1". Here is the current list of keys of your device, called "mf_user_key.dic" 8/Open it with your favorite notepad editor. 9/Go online and check the link: https://github.com/ikarus23/MifareClassicTool/blob/master/Mifare%20Classic%20Tool/app/src/main/assets/key-files/extended-std.keys 10/Copy the content from this page and paste it on your notepad editor. Save, Exit, you are done. 11/Close the ICOPY-X folder, and press "Stop" on your device to disconnect from the PC. You can now duplicate more badges, more easily and more quickly!

#Pentestips : adding keys to the iCopy-x
youtu.be/2Ye-V3tolSs
#RFIDCloning #Lab401 #pentesting #icopyxs #HF #LF #Proxmark3 #MIFARE #iCLASS #infosec #Autoclone

0 0 0 0

@lab401.bsky.social

1 month ago

RDV4.01 upgrades: lower power noise, gold-plated FPC, antenna Q-Switch + LF frequency switch. Built by RRG (iceman & 0xFFFF). 🔧
Learn more🔗 l.lab401.com/8D5uc
#lab401 #pentesting #HardwareHacking #Proxmark3

0 0 0 0

@lab401.bsky.social

1 month ago

Lab401's Pentester Pack : The ultimate hardware pack for pentesters.

Lab401's Pentester Pack : The ultimate hardware pack for pentesters. Three packs of hand-picked hardware for pentesters of all levels: beginner, professional, and hardcore. Portable, powerful, and high-performance. All the hardware you'll ever need for pentesting. RFID: Sniff, Crack, Read, Write and Emulate LF + HF RFID cards. RF/SDR: Capture, Replay, Decode, Analyse, and Control RF devices. BadUSB: Perform RubberDucky / HID Emulation Attacks WIFI / BlueTooth / Infrared: Capture, Replay, Sniff, and Crack. Learn more and get your pentester pack here: https://lab401.com/products/lab401-pentester-pack

Lab401's Pentester Pack : The ultimate hardware pack for pentesters.
youtu.be/yN3SbRblZtM
#Lab401 #PentestPack #FlipperZero #iCopyX #rfid #pentesting #infosec #Proxmark3

0 0 0 0

@lab401.bsky.social

1 month ago

Basic Pack: Budget-friendly RFID pentest kit powered by Proxmark 3 RDV4.01. Detect, emulate & manipulate LF/HF systems affordably. 🛠️📡 l.lab401.com/2Gki6
#Lab401 #PentestPack #rfid #pentesting #infosec #Proxmark3

0 0 0 0

@lab401.bsky.social

2 months ago

ICopy-X: portable, powerful RFID cloner built on Proxmark 3. Supports most HF/LF cards, easy UI for all levels, Proxmark console for pros. A must for pentesters. 📲🔐 l.lab401.com/ip2Vc
#ICopyX #RFIDCloning #Lab401 #pentesting #icopyxs #Proxmark3 #infosec #Autoclone

0 0 0 0

@lab401.bsky.social

2 months ago

The Advanced Pack: Full accessories for iCopy-X & Flipper Zero. Clone nearly any RFID tag & unlock WiFi attacks + GPIO dev. 🧰📶 l.lab401.com/j5HrE
#RFID #Lab401 #PentestPack #FlipperZero #iCopyX #pentesting #infosec #Proxmark3

0 0 0 0

@lab401.bsky.social

2 months ago

Proxmark 3 — a dedicated, powerful RFID multi‑tool: read, write, analyze, snoop, replay, emulate, modulate, demodulate, decode, encode, decrypt, encrypt for 125KHz, 134KHz & 13.56MHz. 📡🔧 l.lab401.com/VdbbM
#Proxmark3 #RFID #LAB401 #infosec #pentesting #redteam

0 0 0 0

@lab401.bsky.social

2 months ago

Proxmark 3 RDV4 "BlueShark" Standalone Kit: integrated wireless standalone functionality — Standalone Mode, Offline sniffing, Offline reading & simulation. l.lab401.com/5paYu
#Proxmark3 #BlueShark #LAB401 #Pentesting

0 0 0 0

@lab401.bsky.social

2 months ago

The Lab401 Pentester Standard Pack: Your professional, portable pentesting solution. Features the iCopy-XS & Flipper Zero for RFID, RF/SDR, BadUSB & more. Flexible, powerful, and ready for the field. l.lab401.com/VcXvg
#Lab401 #PentestPack #FlipperZero #iCopyX #rfid #pentesting #infosec #Proxmark3

0 0 0 0

@lab401.bsky.social

3 months ago

#pentestips iCopy-X how to firmware update

#pentestips iCopy-X how to firmware update Hi, in today's #pentestips we show you how to update the firmware of your iCopy-x. firmware update : https://icopyx.com/pages/update-your-icopy-x https://icopy-x.com/otasys/index.php Get your iCopy-x: https://lab401.com/products/icopy-x

#pentestips iCopy-X how to firmware update
youtu.be/R8ynQgSWDrs
#RFIDCloning #Lab401 #pentesting #icopyxs #HF #LF #Proxmark3 #MIFARE #iCLASS #infosec #Autoclone

0 0 0 0

@lab401.bsky.social

3 months ago

💼 The Lab401 Pentester Pack is your all-in-one toolkit for tackling any pentest challenge: RFID, RF, BadUSB, Wifi Attacks & more. Curated by pros, trusted by pros. 🔐⚡ l.lab401.com/PnU9W
#Lab401 #PentestPack #FlipperZero #iCopyX #rfid #pentesting #infosec #Proxmark3

1 0 0 0

@lab401.bsky.social

3 months ago

#pentestips - Proxmark3 Rdv4: How Deal with problematic tags ?

#pentestips - Proxmark3 Rdv4: How Deal with problematic tags ? It's often that some tags don't respond correctly to the proxmark commands. One very common problem is that the tag is actually too close to the antennas of the proxmark. In this case, the trick is very simple: just place a "spacer" between the antenna and the tag, and run your commands again. You like the #pentestips? Make sure to subscribe and to visit LAB401.com Do you have #pentestips to submit yourself? We would love to partner with you, contact us at support@lab401.com

#pentestips - Proxmark3 Rdv4: How Deal with problematic tags ?
youtu.be/PUDZK3s4soo
#LAB401 #proxmark3 #RFID #infosec #pentesting #redteam

0 0 0 0

@lab401.bsky.social

3 months ago

🌀 ICopy-X: The ultimate portable RFID cloner! Built on Proxmark 3, supports most HF/LF cards, user-friendly for beginners & powerful for pros. A must-have for pentesters! 🔐💳 l.lab401.com/916oW
#RFIDCloning #Lab401 #pentesting #icopyxs #HF #LF #Proxmark3 #MIFARE #iCLASS #infosec #Autoclone

0 0 0 0

@lab401.bsky.social

3 months ago

🛠️ Lab401 PentesterBasic Pack – the most affordable way to start RFID pentesting! 📡 Detect, manipulate & emulate LF & HF RFID systems without breaking the bank! 💰🔓 l.lab401.com/lHVOY
#Pentesting #RFID #infosec #LAB401 #flipperzero #Proxmark3

1 0 0 0

@lab401.bsky.social

3 months ago

#pentestips RFID theory - the right tool for your RFID job

#pentestips RFID theory - the right tool for your RFID job When starting out with RFID, most people often have a specific task: duplicate a specific type of badge, sniff reader communications etc. There are multiple tools, but which is the right one? Everyone's heard of a Proxmark, but is there another tool that could be easier for the job at hand? Or, do you need a combination of tools? In this PTT, we'll walk through finding the right tool for your job.

#pentestips RFID theory - the right tool for your RFID job
youtu.be/Gnf0o1OI3po
#RFID #Proxmark3 #Lab401 #Pentesting #infosec

0 0 0 0

@lab401.bsky.social

3 months ago

#pentestips - Proxmark3: determine badge types

#pentestips - Proxmark3: determine badge types How to quickly detect the frequency of a RFID badge ? How to effectively identify the model of a tag? Using the proxmark 3, connected to a Windows 10 PC, it takes only a few seconds to analyze an RFID card, to identify its technology. Using the "lf search" and "hf search" commands, you get all the basic information you need, with additional hints to further analyze Mifare badges for example. Stay safe, see you next week!

#pentestips - Proxmark3: determine badge types
youtu.be/zhUEK-hFkKA
#LAB401 #proxmark3 #RFID #infosec #pentesting #redteam

0 0 0 0

@lab401.bsky.social

3 months ago

Upgrade your Proxmark3 with the RDV4.01 Long Range HF Antenna Pack! 🚀 Enjoy modular antennas for any assignment. l.lab401.com/Re1yy
#proxmark3 #antenna #rfid #pentesting #infosec #redteam #blueteam #hacking #HF

0 0 0 0

@lab401.bsky.social

4 months ago

RDV4.01 🔐 Optimized for pentesters: pocket-sized & covert, modular antennas, status LEDs, Android-ready via Project Walrus & expandable with BLE/WiFi for stealth ops. l.lab401.com/9x2Ls
#LAB401 #proxmark3 #RFID #infosec #pentesting #redteam

0 0 0 0

@lab401.bsky.social

4 months ago

#Pentestips : adding keys to the iCopy-x

#Pentestips : adding keys to the iCopy-x This video will present you how to update the list of keys on the iCopyX, to read and crack the 1 Kilo RFID badge more efficiently. In this video we will quickly see how a standard 1-kilo badge works, then we will learn how to update the list of keys included in the iCopyX, and finally, we will see how faster the device is with this update. First, let's see quickly how a badge works. You can use the software HxD (https://mh-nexus.de/en/hxd/) or any other hexadecimal editor to view and edit your dumps. Inside the badge, you have a series of 16 sectors, each protected by 2 keys (Key A and Key B). In this example, these are the keys JcRhFw (4A 63 52 68 46 77) and SfSdLe (53 66 53 64 4C 65), and FF FF FF FF FF FF at the end of the badge. In order to read and write a specific sector, you need to know these keys. Please also note the very first line of the dump contains the UID of the badge. In this example, it is FA 7C 7B 3A. In order to make a duplicate, the iCopyX device can crack the unknown keys by various attacks, but the more keys you know upfront, the easiest and quickest it is to fully crack a badge. Here is the procedure to add new keys to your device: 1/Turn On the device 2/Navigate to PC-Mode 3/Connect the device to your PC via USB 4/Wait a few seconds that your computer installs a few drivers 5/Press Start on your device (either of the top 2 buttons) 6/Wait for the device to connect to the computer, after a few seconds, you will have a new Disk (ICOPY-X) on My Computer. Open that disk. 7/Open folder "keys" and then "mf1". Here is the current list of keys of your device, called "mf_user_key.dic" 8/Open it with your favorite notepad editor. 9/Go online and check the link: https://github.com/ikarus23/MifareClassicTool/blob/master/Mifare%20Classic%20Tool/app/src/main/assets/key-files/extended-std.keys 10/Copy the content from this page and paste it on your notepad editor. Save, Exit, you are done. 11/Close the ICOPY-X folder, and press "Stop" on your device to disconnect from the PC. You can now duplicate more badges, more easily and more quickly!

#Pentestips : adding keys to the iCopy-x
youtu.be/2Ye-V3tolSs
#RFIDCloning #Lab401 #pentesting #icopyxs #HF #LF #Proxmark3 #MIFARE #iCLASS #infosec #Autoclone

0 0 0 0

@lab401.bsky.social

4 months ago

🎒 Lab401 Standard Pack: portable, powerful & flexible. Includes iCopy-XS (with card packs) + Flipper Zero for RFID, RF/SDR, BadUSB, IR & more. The go-to toolkit for most pentesters. l.lab401.com/jBjfC
#FlipperZero #Lab401 #iCopyX #RFID #pentesting #infosec #Proxmark3

0 0 0 0

@lab401.bsky.social

4 months ago

#pentestips Using the iCopy-x as a proxmark

#pentestips Using the iCopy-x as a proxmark As you may already know, the iCopyX is an autonomous device based on the Proxmark 3. Most of the time, you will use it handheld, with its dedicated interface and buttons. But if you want to go further, you can use it as a proxmark. in today’s #pentestips we are Using our iCopy-X as a Proxmark. While Using the icopy-x handheld, you can simply press the right arrow on the device while it’s working. It will display the proxmark console that works in the background. you can zoom in using the right button on top and zoom out using the left button on top. If you want to use the iCopyX as a true Proxmark, launch the PC-Mode on your icopy-x, then connect it to your PC, open the icopy-x drive and run the « run.bat » script. at this point, a console will pop on your PC asking you what COM port is assigned to the iCopyX. To find this information navigate in the Device Manager of your computer : just type device manager in your windows search, Input that number in the iCopyX console hit Enter. After a few seconds you get a genuine Proxmark console : Now you can use all the standard proxmark commands on your pc. Get your iCopy-X: https://lab401.com/products/icopy-x If you have questions, please contact support@lab401.com Stay safe! and see you next time.

#pentestips Using the iCopy-x as a proxmark
youtu.be/9ZVY8WXBikc
#RFIDCloning #Lab401 #pentesting #icopyxs #HF #LF #Proxmark3 #MIFARE #iCLASS #infosec #Autoclone

0 0 0 0

@lab401.bsky.social

4 months ago

📡 Proxmark3: the ultimate RFID multi-tool. Read, write, analyze, snoop, replay, emulate & crack RFID at 125kHz, 134kHz & 13.56MHz. A must for serious RFID research & pentesting. l.lab401.com/injee
#RFID #Proxmark3 #Infosec #LAB401 #pentesting

0 0 0 0

@lab401.bsky.social

4 months ago

🔐 ICopy-X: a portable RFID cloning powerhouse. Built on Proxmark3, it supports most HF & LF cards. Easy UI for beginners, Proxmark console for pros. A must-have for pentesters & researchers. l.lab401.com/tpdU0
#ICopyX #RFIDCloning #Lab401 #pentesting #Proxmark3 #infosec #Autoclone

0 0 0 0

@lab401.bsky.social

4 months ago

🧰 Lab401 Pentester Packs = top tools for RFID ops without breaking the bank! Detect, emulate & manipulate LF/HF systems—budget gear, elite results. 🔐 l.lab401.com/Nuri2
#RFIDTools #Lab401 #PentestPack #rfid #pentesting #infosec #Proxmark3

0 0 0 0

@lab401.bsky.social

5 months ago

🎒 The Standard Pack upgrades your toolkit with portable, high-performance gear! Featuring iCopy-XS + Flipper Zero for RFID, RF, IR, USB exploits & more—ready for field or desk! 🚀 l.lab401.com/svjBs
#Lab401 #PentestPack #FlipperZero #iCopyX #rfid #pentesting #infosec #Proxmark3

0 0 0 0

@lab401.bsky.social

5 months ago

Full set of blank HF/LF tags for advanced cloning: MIFARE Classic®, Ultralight®, NTAG®, iCLASS®, ICODE®, plus 2x T5577 LF cards. l.lab401.com/ISbbk
#RFIDCloning #Lab401 #pentesting #icopyxs #HF #LF #Proxmark3 #MIFARE #iCLASS #infosec #Autoclone

0 0 0 0