Captured in a friends sling, enjoying a nice deep fuck

#rubber #blackstyle #catsuit #S10mask #Studiogum #fullgear #restraints #dungeon #sling #darkroom

Looks like I have a little problem....
#locked #carrarabelt #chastity #rubber #adidas #chastity #niketn #s10mask

my big boy @rubbersubstrix.bsky.social held out his sexy ass and my little boy @lilrubberboy.bsky.social helped 😈😏

#germantwink #bare #rubber #rubbertwink #playroom #gayfuck #fuckandblow #gayblow #3er #S10Mask #Blindfold

To celebrate videos coming to BlueSky, let me start by sharing what my Screen10 project looks like in motion ✨

A year of work on this, and I'm not finished, but already looks amazing in photos 🤩

#S10Mask #KinkElectronics #KinkMaker

Me holding a pup hood muzzle in front of a S10 mask

Me holding a pup hood muzzle in front of a S10 mask. You can see a magnet fitted in the muzzle button

Pup hood muzzle fitted on the S10 mask

Made a 3D printed button magnet thing to hold it better on the mask 😁

Magnets are still too weak to hold tight enough, but it's a sourcing issue.

If anyone got a foot and stein small 12mm wide one, I'm all ears!

#KinkMaker #PupHood #S10Mask

S10 gas mask with screen as lenses playing the Pedro racoon meme

I cannot be trusted with technology 🤣 (thanks @pupartemis.dog for the suggestion 😁)

#KinkElectronics #KinkMaker #S10Mask

(Video here: rubber.social/@Xantw0/1126...)

Xantw0 ⊗⊘ (@Xantw0@rubber.social) Attached: 1 video I think I can say it now. The hardware part of the Screen10 is now complete for this version. I can wear it, I can manage to see though it (although a bit blurry), and it looks SO ...

Now would be a good time to have video support here, but in the meantime... Check this out 👀

#KinkMaker #KinkElectronics #S10Mask

Inside of an s10 mask with cables all around and screen where the lenses are. There's also a massive 3D printed filter contraption where the cables are coming from

Front of an S10 mask with blacked out lenses (they're actually screens) with a massive 3D printed filter attached to it.

Still of a video of me holding the mask to my face with the lenses showing visuals of my logo on both lenses

You can't even imagine how fucking good I feel right now.
IT FREAKING WORKS!

I am SOOOOO close to having something complete (fitting the lenses inside, slightly better cable management) BUT IT DOES WHAT I WANT IT TO DO AAAAAAAA 💖

#KinkElectronics #KinkMaker #S10Mask #Maker #RaspberryPi #DIY

Full body latex covered man (drone) with an S10 gas mask with blue and red lens outserts. The photo is monochromatic except for the lens with the blue and red colours. The drone is looking down, head tilted, at it's latex covered right hand opened up. You can see the other hand in the reflection of the red lens, in a fist position

Noticing some changes 🖤
🔵🔴

#ShinySaturday #Latex #Rubber #LatexDrone #RubberDrone #DroneKink #S10Mask #KinkPhotography

New grey rubber suit by Kinkprojects. Do we like a grey drone? #rubberdrone #rubbergimp #newlatexdress #newsuit #rubberoutfit #s10mask

3D printed custom filter box for S10 mask

3D printed custom filter box for S10 mask, the lid is removed showing a battery, raspberry pi and display PCBs

Same filter but screwed on a mask. It's bigger than a traditional S10 filter

What happens when you start cleaning and sorting stuff out...

You get distracted by doing some tests with the hardware you sort and do some test fits!

Some updates required, but a good start 💪

#KinkElectronics #S10Mask

Testing new gear combinations #heavyrubberfetish #heavyrubber #blackstyle #s10mask #harness #rubberdrone #rubbergimp

Workbench showing a mess of electronics, and a circular display showing an audio visualisation with a series of vertical red bars going up and down based on frequency

Not completely done, but "It's something"

Running into an issue where noise is SUPER high, or my sound card doesn't like my microphone, so I need to get/make a new mic to check

I'll play with colours and smooth the animation a bit 🤔

#KinkElectronics #S10Mask

(📽️: rubber.social/@Xantw0/1117...)

Screenshot of Cura and Orca Slicer comparing printing times Cura shows 4h57 and Orca 3h38

Printing a new set of the S10 Screen holders since all of the others broke, and though I would try a new slicer.

Going from Cura to Orca Slicer, and for the same print, similar settings, I'm saving 1h of print time 🤯

#KinkElectronics #S10Mask #3DPrinting

Don't worry, between my horny thoughts and rambling, I haven't forgotten about this 😁

I'm just waiting for my pay to once again get some supplies, and hopefully a bonus to get a new printer 🤩

I'll try to add an audio visualiser to it this weekend, so keep an eye out 👀

#KinkElectronics #S10Mask

Inside view of an S10 Gas Mask. On the lens we can se a screen with a magnifying lens in front of it

Inside view of an S10 Gas Mask. On the lens we can se a screen with a magnifying lens in front of it

Back to some positive notes, I might have found the right lens for my use 🤩

The screen is offset as an attempt to help, but I can just center it!
Vision will still be VERY tedious and laggy (like the shittiest VR headset you could imagine), but should work its purpose.

#KinkElectronics #S10Mask

Close-up view of the screen holder showing the inner ring ripped off

Close-up of the screen holder showing cracked layers on the side

Here's a problem (making is not always a success 😔)

Not sure if it's because of the PLA I used, 3D printing, or else, but I had frequent failures on the edges on layers that have to flex and bend to fit in the mask...

I wonder if ABS or PETG would make it more solid 🤔

#KinkElectronics #S10Mask

S10 Gas mask with screen eyes. I pull out a controller to control the googly eye display moving the eyes

S10 Gas mask with screen eyes. I pull out a controller to control the googly eye display showing japanese inspired expression of Triangle.

S10 Gas mask with screen eyes. I pull out a controller to control the googly eye display showing japanese inspired expression of O.

BACK TO REGULAR PROGRAMMING!
NERDY KINK-ish STUFF 🤓!

Now, I can manually move the eyes, and show some simple "expressions".

Next: Some eye lids for blinking or emotions 👀

#KinkElectronics #S10Mask

(Video: rubber.social/@Xantw0/1115...

A screen plugged into a raspberry pi zero showing a still from a video

This does not look like much, but means that I found a way to do that "cheap" version of the screen lens where you can only stream video to it.

Still some work to do on the software side to make it run consistently though...

#KinkElectronics #S10Mask

Already thinking about a cheaper version for these to only display video or stream so you can turn an S10 into a pseudo VR headset, or blindfold with outwards video 👀

(INSISTING ON THE "PSEUDO VR", You will never achieve the level of clarity of a real one...)

#KinkElectronics #S10Mask

S10 Lens Screen project with a black tint on the lens, and a LED ring glowing rainbow colours

S10 Lens Screen project with a black tint on the lens. Only the screen is visible

S10 Lens Screen project with a black tint on the lens. I lift the temporary lens to reveal the clear one showing the whole contraption and diffuser.

And a bit of window tint later, It hides the "messy" cables a bit, and ESPECIALLY with the LED off.

Now I should probably add a "off" mode for the out screen to go full stealth 👀

#KinkElectronics #S10Mask

(Video: rubber.social/@Xantw0/1115... )

So, the support seems to work 🎉

It's getting a bit crowded in the mask, and unfortunately my choice of lenses seems wrong, so I need to look in to something else that would work...

A setback, but hopefully surmountable 💪

#KinkElectronics #S10Mask

(Video: rubber.social/@Xantw0/1115... )

Screenshot of the S10 Screen holder model in FreeCAD showing an extra contraption to hold a lens.

Back to 3D printing and I have NO idea if what I'm doing will work, but hey, that's part of the fun 😁

Waiting for it to print now ⌛

#KinkElectronics #S10Mask

S10 Mask with screen on lenses showing a live video feed with a countdown. The lens has a LED ring acting as a flash for the photo

Photo take by the mask with a watermark containing my logo, Event name, date and time

Now everyone say "DROOOONE" for the picture 📸

Python is full of surprises and fun when you look into it. Now if I can find a way to print that on a wireless portable printer that would be 👌

#KinkElectronics #S10Mask

(Video: rubber.social/@Xantw0/1114... )

☢️☢️☢️
This drone is equipped with all sort of sensors to warn you in case of emergencies*

*X0-Tech is not liable to the non accuracy of these claims 👀

#KinkElectronics #S10Mask

(Video here: rubber.social/@Xantw0/1114... )

Close up of tinted lens showing a few bubbles

Photo of modified S10 gas mask with front module removed and swapped for a threader insert. The right valve has also been swapped for a 3D printed one

I ended up doing some 3D printing and... Finally getting around modifying my new mask 😬

I'll also wait on changing the flat lenses because the one I have has a bubble I can't manage to get rid of, and I might swap it for a darker tint.

#KinkElectronics #S10Mask

S10 Lens screen showing a Queer Villain pride flag

S10 Lens screen showing a Queer Villain pride flag, and a dual lock screen overlay

Sometimes, your drone also needs some security feature so that no unauthorised user can take control...
...Or that the drone itself remains locked out 👀🔒

(Also featuring the Queer Villain mask distressedegg.fun/qvp )

#KinkElectronics #S10Mask

(Video here: rubber.social/@Xantw0/1114... )

S10 mask showing a Kernel Panic like screen with a notice in French, German and English to reboot the drone. Close up on left lens

S10 mask showing a Kernel Panic like screen with a notice in French, German and English to reboot the drone.

Now I got you sorted UNIX fans 🐧🍎

#KinkElectronics #S10Mask

S10 Mask with screen lenses showing a spark icon

You can see me controlling it with a scrollwheel

S10 Mask with screen lenses showing a spark icon filling up in sync with a ledring with the yellow color to represent energy/electricity.

Hmm... Yes it's the... Battery level indicator... Nothing more 👀 ⚡

#KinkElectronics #S10Mask #Estim

(Video here: rubber.social/@Xantw0/1114... )

S10Mask with screen eyes showing a windows BSOD

S10Mask with screen eyes showing a windows BSOD. We see a QRCode that lead to a video

Uh oh, I guess I'll need to be better at coding...

(For real though, while this worked, I actually made the Pi crash with a new screen I'm working on 🙃)

#KinkElectronics #S10Mask

(Video here: rubber.social/@Xantw0/1114... )