DSP

An upturned #boat in the #working #shipyards of #Tollesbury #Essex. This #sturdy #craft is slowly #rusting away and needed a little #attention. It is also clearly part of the #localbusiness of the area. #abstractart #Abstract #PhotographyIsArt see more at www.darrensmith.org.uk

#printerbounty ran the first set of objects on the new screen and they printed great.

The 25” Rocinante will be amazing! Last pic shows size difference for one of the PDC housings between the 15” and the 25” print

#GeekDen #ShipYards

The seconds Grail Commission Givewaway is complete: The XGP 15A-II from Outlaw Star

STL by GoGoJon on Printables

3D Printed in resin
Base laser cut and engraved

#GeekDen #ShipYards #Grail #2026Projects #2026Commissions

I tried running it on white acrylic and unfortunately my diode laser couldn’t do it. I ran it on bass wood to test out the fit.

I’ll try something else too and see what other options might work

#GeekDen #Shipyards

Ok, I had a bit of a breakthrough with the stand for this ship.
It just doesn’t have a good spot for a single support to reach and balance it and I really didn’t want to drill a hole inside.
I have a nice base designed and I’ll run it on the laser tonight

#GeekDen #Shipyards

Working (just a little bit) on the Rocinante again today, starting with some of the grey but also testing out the holographic tape I am going to use for the advanced armor

#GeekDen #Shipyards

More work on the 15” Rocinante. Base coat black painted and added magnets for the PDC covers and turrets

#GeekDen #Shipyards

However I knew as soon as I got it I’d need to weather it up. Gonna start off with a black wash and panel line.
Once it’s dry I’ll add some silver and rust penciling

#GeekDen #Shipyards

A bit of weathering, more details, and a clear coat finishes the StarCraft Wraith from @rjb-mallacore.bsky.social

#2026Projects #GeekDen #Shipyards #StarCraft

I need to spend some time this week making stands with the laser cutter

Spent a little bit of time on some of the details for the Wraith. Tomorrow some quick weathering and I’ll call it done

#GeekDen #Shipyards

#printerbounty, I thought that StarCraft Wraith printed really well so I decided to print one I can paint up here. Model by @rjb-mallacore.bsky.social

Also, for those who celebrate, the new StarCraft table top game (think WH40K) released for preorder.

#GeekDen #Shipyards

Working more on the Rocinante and had a discussion with the comm about size. We feel we can, and should, go bigger.

I’ll be reprinting at +50%

Pics compare to the Eaglemoss Roci and XL Roci

#GeekDen #Shipyards

A little parts cleaning and test assembly work on this Rocinante.

PDCs will be magnetic, but landing legs will be fixed in the retracted position

#GeekDen #Shipyards

#Printerbounty, another one of @rjb-mallacore.bsky.social ‘s great models, his StarCraft Terran Wraith

This is shipping out as a kit

#GeekDen #Shipyards

A quick side by side of the Master Replicas Destiny and my 15” and 25” prints

#GeekDen #Shipyards #Stargate

More progress on the outlaw star xgp.

Blue details added. On to the metallic colors for the engines

#GeekDen #Shipyards

The model imported quite well, I was able to remove the landing struts and close the landing ramp. This ship will need to swoosh first

#GeekDen #Shipyards

Very excited about this next project, I came across this amazing starship design by @danilomsaito (ig) of a new Star Wars Mandalorian type ship and I asked if I could see if it might print well.

I’m going to give it a test print this weekend

#GeekDen #Shipyards

#2026Projects Printed and finished a 6” version of the Peacekeeper Marauder from Farscape. One of the engine thrusters disappeared so I’ll fix that later but this is pretty much done.

3D model by John McLeod

#GeekDen #Shipyards #Farscape

#printerbounty, the start of a new commission, a 15” Rocinante using Gambody’s file. This one will be painted like we saw her in the last episode of season 6

#GeekDen #Shipyards

#printerbounty a new project in the works, first print came out nicely

#GeekDen #Shipyards

#printerbounty, a HF400 Heavy Fighter form @rjb-mallacore.bsky.social Stargate bases MOCs. Approximately to scale with the Eaglemoss F-302

This will be painted by the client

#GeekDen #Shipyards

#printerbounty, another 6” ish long Jupiter 2 movie version for a fellow fan of the movie

3d model by John McLeod

#GeekDen #Shipyards

Finnish shipyards, including Canadian-owned one, building icebreakers for U.S. despite Greenland tensions Trump's desire to acquire strategically-located Greenland has now raised "more and more" suspicions about the deal, says one Arctic expert.

Finnish shipyards, including Canadian-owned one, building icebreakers for U.S. despite Greenland tensions Trump's desire to acquire strategically-located Greenland has now raised ‘more and mo...

#World #News #Davie #Shipyards #Finland #Greenland #icebreakers

Origin | Interest | Match

John finished the Beggar and I’ll be running a test print this week

#GeekDen #Shipyards #Foundation

Very excited about this upcoming model, The Beggar’s Lament from Foundation.

Being models by the very talented John McLeod who you might know from a lot of the great Farscape models I’ve printed.

Almost ready to print.

#GeekDen #Shipyards

Side by side with the Onyx Cinder I painted from @melminiatures.bsky.social last year

#GeekDen #Shipyards #SkeletonCrew

You know me and scale, after chatting with someone tonight we both realized the movie version Jupiter 2 and the Millennium Falcon are very close to the same size.

Here the 3d printed model and the X-Wing Lando version are close scale with eachother

#GeekDen #ShipYards #ScaleMatch

2025-10-15_16-36-41_GR_Crete_JH_K70 Venetian shipyards (Neoria)(arsenals), walk in Chania location: Chania, Crete, Greece author: Jan Helebrant www.juhele.blogspot.com license CC0 Public Domain Dedication

#Venetian #shipyards (Neoria)(#arsenals), #Chania, #Crete, #Greece
www.flickr.com/photos/96541...
#Χανιά #city #history #architecture #building #harbour

#2026Project #GeekDen #Shipyards

Babylon 5 White Star Mimbari / Vorlon hybrid cruiser.

File from Gambody. 3D printed in resin, hand painted, custom acrylic cut and etched stand.

#CommissionsOpen