A miniature diorama with a sarcophagus surrounded by columns disposed into a half circle. The columns are painted into an ivory white, while the floor is painted various shades of grey/blue. On top of the sarcophagus is the miniature of a vampire platypus person rising in the air, with bat wings unfurled and a blue cape. On the floor is the platypus vampire hunter, jumping backwards and aiming his crossbow at the vampire.

Same diorama, different angle

Same diorama, different angle

I'm calling this done. I'll do better next time, hopefully.

#SquidmarOpen #WarhamFam #WarhammerCommunity #MiniPainting #miniaturePainting #CobraMode

A miniature diorama with a sarcophagus surrounded by columns disposed into a half circle. The columns are painted into an ivory white, while the floor is painted various shades of grey/blue. On top of the sarcophagus is the miniature of a vampire platypus person rising in the air, with bat wings unfurled and a blue cape. On the floor is the platypus vampire hunter, jumping backwards and aiming his crossbow at the vampire.

The same diorama, from another angle

#squidmaropen putting on the finishing touches

#SquidmarOpen #WarhamFam #WarhammerCommunity #MiniPainting #miniaturePainting #CobraMode

Today is the last day for the Squidmar Open submissions. Wish me good luck!

#SquidmarOpen #WarhamFam #WarhammerCommunity #MiniPainting #miniaturePainting #CobraMode

A miniature diorama with a sarcophagus surrounded by columns disposed into a half circle. The columns are painted into an ivory white, while the floor is painted various shades of grey/blue.

A miniature of a platypus person dressed in leather with an old fashioned pilgrim hat. It is jumping backwards and holding a crossbow in his right hand, and a sword in his left hand The pants are painted red, the jacket is painted in a desaturated brown. The fur is dark red, and the hat in the same brown as the jacket. The shirt is painted ivory. The bill is painted yellow. The crossbow is painted a reddish brown with gold highlights, the gloves are painted yet another brown. The sword is painted metallic steel, with a copper guard. The claws are black.

The vampire hunter platypus, from the back where you can see his red cape

A miniature diorama with a sarcophagus surrounded by columns disposed into a half circle. The columns are painted into an ivory white, while the floor is painted various shades of grey/blue. On top of the sarcophagus is the miniature of a vampire platypus person rising in the air, with bat wings unfurled and a blue cape. On the floor is the platypus vampire hunter, jumping backwards and aiming his crossbow at the vampire.

I washed and dry brushed the column, trying to go for a dirty sandstone, and while the wash dried, I improved the contrast on the hunter

A miniature of a platypus person dressed in leather with an old fashioned pilgrim hat. It is jumping backwards and holding a crossbow in his right hand, and a sword in his left hand The pants are painted red, the jacket is painted in a desaturated brown. The fur is dark red, and the hat in the same brown as the jacket. The shirt is painted ivory. The bill is painted yellow. The crossbow is painted a reddish brown with gold highlights, the gloves are painted yet another brown. The sword is painted metallic steel, with a copper guard. The claws are black.

A miniature diorama with a sarcophagus surrounded by columns disposed into a half circle. The columns are painted into an ivory white, while the floor is painted black.

I finally felt good enough to paint again and painted the floor of my decor, and tried to push the contrast on the pants of my vampire hunter.

@MiLk is the contrast on the pants good enough yet?

#WarhamFam #WarhammerCommunity #MiniPainting #MiniaturePainting #CobraMode

A miniature diorama with a sarcophagus surrounded by para disposed into a half circle. Riding from the sarcophagus is a platypus man vampire, and jumping backwards from it is a platypus man vampire hunter.

Ok I feel lazy and cheating but this looks too good not to use it. Probably Lisa better than if I did the one I had settled on.

#miniatures #WarhamFam #WarhammerCommunity #MiniPainting #MiniaturePainting #CobraMode

A miniature of a platypus person dressed in leather with an old fashioned pilgrim hat. It is jumping backwards and holding a crossbow in its right hand. The pants are painted dark red, the jacket is painted in a desaturated brown. The fur is in the same dark red as the pants, and the hat in the same brown as the jacket. The shirt is painted orange. The bill is painted yellow. The crossbow, sword (held in the left hand) and gloves are unpainted and black. Seen from the front.

The same miniature seen from the back, which is mostly covered by a dark red cape.

Added some more color, checking out if/how they work. Orange for the shirt isn't great so I'll try cream or yellow next, and I need another color for the gloves and belts.

#WarhammerCommunity #WarhamFam #MiniPainting #MiniaturePainting #CobraMode

Added some more color, checking out if/how they work. Orange for the shirt isn't great so I'll try cream or yellow next, and I need another color for the gloves and belts.

#WarhammerCommunity #WarhamFam #MiniPainting #MiniaturePainting #CobraMode

A miniature of a humanoid creature with bat wings and a long cape. The cape falls down, giving the impression the body is floating off the ground. The inside of the cape is painted blue. The jacket and pants are painted black with highlights in grey. A shirt and tie are painted grey/white. The sleeves are painted black, with blue cuffs. The wings are painted magenta, with a blue border and a messy gradient. The head is the head of a platypus, painted in gradients of grey to white. Canine teeth are showing from the beak. The eyes are red and a glowing effect has been added to the fur around them.

It's a game of spot the differences.

I think I'm ready to move on now. I'll come back again, of course.

#WarhamFam #WarhammerCommunity #MiniPainting #Miniatures #MiniaturePainting #CobraMode

A miniature of a humanoid creature with bat wings and a long cape. The cape falls down, giving the impression the body is floating off the ground. The inside of the cape is painted blue. The jacket and pants are painted black with highlights in grey. A shirt and tie are painted grey/white. The sleeves are painted black, with blue cuffs. The wings are painted magenta, with a blue border and a messy gradient. The head is the head of a platypus, painted in gradients of grey to white. Canine teeth are showing from the beak. The eyes are red and a glowing effect has been added to the fur around them.

I painted the head and I'm actually happy with it.

#WarhamFam #WarhammerCommunity #MiniPainting #Miniatures #MiniaturePainting #CobraMode

See a vampire, post a vampire

#miniatures #CobraMode #3DPainting

Cleaned up my lil gnome ranger 🍀
Mini by @tinefieldling.bsky.social
Base by #cobramode

In my mind, Cobra Mode make some of the best miniatures on the web.

#CobraMode

This is my first attempt at painting miniatures now that I've gotten a little better at printing them. The model is from CobraMode miniatures and I'm using Vallejo paints from the set recommended by Squidmar. The piece is still in progress 😅.
#Vallejo
#CobraMode
#Squidmar

If you see this, quote repost with a sword 🗡️

Model by #cobramode

#minipainting
#3dprinting

Finished this little budgie guy in 32mm scale by #cobramode

#minipainting
#miniaturepainting
#3dprinting

Just a lil guy.
#cobramode #minipainting #goblins #gobbies #miniaturepainting #armypainter

Old work 🌸. Playing with skin texture and NMM is always a pleasure 🖌️. Model from @cobramode and printed by @dragon_miniatures

#paintingminiatures #paintingwarhammer #cobramode #ageofsigmar #warhammer40k #art #best4minis #3Dprinted #oeiartminiatures

Fidelium (mothfolk) Tamer and insect friends.
Models and bases by #cobramode

#miniatures
#minipainting
#3dprinting

Resin printed and painted model of a toad person priest by a pond with water feature fountain

Model by #cobramode
Custom base

#miniatures
#minipainting
#3dprinting

3d printed and painted model of a kappa

Kappa Model by Calrais on thingiverse.
Base by #cobramode

#miniatures
#minipainting
#3dprinting

CobraMode 3D Printable Miniatures STLs

You could try #cobramode they tend to do a lot of animal folk and animals, otherwise a quick search on myminifactory should find something

www.cobramode.com

Figure designed by Twin Goddess Miniatures and base designed by Cobramode. In regular lighting.

Figure designed by Twin Goddess Miniatures and base designed by Cobramode. In the dark.

Figure designed by Twin Goddess Miniatures and base designed by Cobramode. In dim lighting.

Playing with lights! I'm still figuring out the best way to use them, but I thought this lich would look cool with a green glow.

The mini was designed by @twingoddessminis.bsky.social and the base was designed by #cobramode.

#ttrpgminis #dndminis #ttrpg #dnd #dungeonsanddragons #minipainting

Resin printed CobraMode Nemesis figures mostly base coated with paint.

WIP CobraMode Nemesis figures. Almost done with base colors. #miniatures #CobraMode

Finally got around to printing some CobraMode figures. A little Nemesis dude and some Salamander Surgeons. #miniatures #resinprinting #CobraMode