I’m using the High Country Tools 3/8” flush trim bit to cut out some charcuterie boards with my Sawstop router table. I cut out the 1/4” thick acrylic templates on my laser. This bit is a 3/8” diameter, but has a 1/2” shank.

#sawstopsaws #highcountrytools #router #bits #routerbits

Time to flatten another board. Tonight it's a nice piece of walnut. I use the xbox controller to run the Ripper flattening bit over the wood until I have hit all of the surface. Then I flip it over and do the same to the other side and get it to the thickness I want.

#onefinitycnc #highcountrytools

It's time to flatten another piece of white oak. I just use the xbox controller to run the Ripper flattening bit over the wood until I have hit all of the surface. I use xfasten double sided cnc tape to hold the board in place.

#onefinitycnc #redlinecnc #highcountrytools #xfasten #CNC

The next Millennium Falcon catch all tray is going to be made of cherry wood. I’m flattening this on the OneFinity CNC using an Xbox game pad with the Redline CNC controller. I’m using the Ripper flattening bit from high country tools.

#onefinitycnc #redlinecnc #highcountrytools #CNC #flattening

The next Millennium Falcon catch all tray is going to be made of cherry wood. I’m flattening this on the OneFinity CNC using an Xbox game pad with the Redline CNC controller. I’m using the Ripper flattening bit from high country tools.

#onefinitycnc #redlinecnc #highcountrytools #CNC #flattening

I’m making some catch all trays and needed to flatten this piece of spalted maple. I’m using this ripper flattening bit from high country tools.

I love being able to use this Xbox controller to flatten.

#onefinitycnc #redlinecnc #highcountrytools #CNC #flattening

This was scanned with the Einstar Vega scanner and then brought into Vectric CNC software for the carve. I really like the visualization of carving in the software as it will show the roughing and detail pass.

#vectric #onefinitycnc #redlinecnc #highcountrytools #CNC