Advertisement · 728 × 90
#
Hashtag
#scalemodels
Advertisement · 728 × 90
Post image

Is it really an 80s car with a turbo if it doesn't have turbo on absolutely everything?? #scalemodels #histscalemodels #carmodels #cars

31 1 3 0
Post image Post image Post image

Some more done with the 1/16 Sherman. Hatches fitted, there is an issue with the small hatch, to open it fully which is what I want I'll have to do some cutting out. Poor really as its a open and close feature #histscalemodels #scalemodels

20 1 2 0
75mm white metal miniature of an Indian Army Cavalry Officer painted in acrylics.

75mm white metal miniature of an Indian Army Cavalry Officer painted in acrylics.

75mm white metal miniature of an Indian Army Cavalry Officer painted in acrylics.

75mm white metal miniature of an Indian Army Cavalry Officer painted in acrylics.

WIP - after some fairly extensive surgery on his wrists and the sword, the Indian Cavalry Officer is now armed and has all his limbs. Need to build wrists up with putty and then finish tidying up the paint on straps, gauntlets etc, but the end is finally in sight! #histscalemodels #scalemodels

23 1 2 0
Hachette Graf Zeppelin 1/200 scale model, step 35

Hachette Graf Zeppelin 1/200 scale model, step 35

Hachette Graf Zeppelin 1/200 scale model, step 35

Hachette Graf Zeppelin 1/200 scale model, step 35

Step 35/140: Continue starboard hull assembly; only two screws needed, but tight space makes installation tricky. Ship now weighs over 2 kg.

#Scalemodels #Hachette #Grafzeppelin
#Kriegsmarine #WW2 #aircraftcarrier #cv

0 0 0 0
Post image Post image

The upper and lower sections of the turret were a very poor fit, had plenty of glue and clamps on all day. The turret has casting detail, due to sanding down It lost some detail. I have used some Vellejo plastic putty and tippled the casting pattern back in. #histscalemodels #scalemodels

18 1 1 0
3D printed model of a Y-wing as seen in the original Star Wars trilogy.

3D printed model of a Y-wing as seen in the original Star Wars trilogy.

In-progress studio scale Y-Wing model. #scalemodels #starwars

18 2 1 0
The following pictures depict a finished model of an early, Series 1 Land Rover pickup. It's body is a light grey, with the chassis being a light navy blue.
This photo shows an angle from the front.

The following pictures depict a finished model of an early, Series 1 Land Rover pickup. It's body is a light grey, with the chassis being a light navy blue. This photo shows an angle from the front.

The front again, but posed with a Canadian quarter to give a sense of scale

The front again, but posed with a Canadian quarter to give a sense of scale

Top down view of the box

Top down view of the box

View of cab's interior as seen from the back window. The dashboard's gauges and the steering wheel are in plain view.

View of cab's interior as seen from the back window. The dashboard's gauges and the steering wheel are in plain view.

This took a stupid amount of time to finish thanks to a mental slump, but she's finished now! 1/43 Land Rover Series 1 by AirFix. Mostly painted with various Vallejo Acrylics and a good dose of Tamiya Panel Liner

#Airfix #Scalemodels #LandRover

1 0 1 0
1/72 scale MikroMir/ AMP Canberra TT.18 model standing on the workbench.

1/72 scale MikroMir/ AMP Canberra TT.18 model standing on the workbench.

The 1/72 MikroMir/ AMP Canberra TT.18 is on its feet and getting closer to the finish line! I have a long to do list of details, and I'm dreading the antenna wire bit, for which I'll use Infini wire. #histscalemodels #scalemodels

49 3 3 0
Post image Post image

More work done, the lower hull and top hull sections under way. There's still loads to go on from the sprues. These are just fit together to check for alignment and not glued yet. No issues so far. #histscalemodels #scalemodels

23 1 2 0
Post image Post image Post image

Airfix 1/144 737-200 using 50-year-old Microscale decals, which went down shockingly well. Windows will come from an Authentic Airliners set.

#scalemodels #histscalemodels

15 2 0 0
Post image Post image Post image

#histscalemodels #scalemodels Finished weathering the 1917 Model T ambulance. Muddy tires and fenders created using Vallejo's "Thick Mud" and Tamiya "Clear" to give a wet effect. Also, a touch of AK's "Fresh Mud" (which is really a wash) applied using the toothbrush splittering technique.

42 4 5 0
Post image

Another one I made earlier, Tamiya 1,35 Achilles Tank. #HistScaleModels #ScaleModels #Tamiya

72 4 6 0
Huma Junkers EF 128 1/72 scale model.

Huma Junkers EF 128 1/72 scale model.

Huma Junkers EF 128 1/72 scale model.

Huma Junkers EF 128 1/72 scale model.

Huma Junkers EF 128 1/72 scale model.

Huma Junkers EF 128 1/72 scale model.

Showcase-Sunday: Junkers EF 128 (Huma, 1/72)
More: www.scratchbaer.de/whatif-aircr...

#Scalemodels #Whatif #Huma #Junkers #ef128 #Luftwaffe #ww2

1 0 0 0
Post image Post image Post image Post image

Today's progress. All the wheels are done. I'll spray these before they go in the lower hull to get into the nooks and crannies. Some nice rubber tyres to add. #histscalemodels #scalemodels

26 2 1 0
the Real Grade Shining Gundam, a red, white, blue and yellow robot with gold bits

the Real Grade Shining Gundam, a red, white, blue and yellow robot with gold bits

the Real Grade Shining Gundam in the "Shining Finger" pose

the Real Grade Shining Gundam in the "Shining Finger" pose

fingerino

#gundam #gunpla #plamo #scalemodels #mecha

17 1 0 0
Post image Post image Post image

The wife's gone to work for the day, ive got nothing to do...well...its time for the big one. I Llove kits 1/16 scale Sherman M4A3E8. #histscalemodels #scalemodels

26 2 7 0
Post image

WIP... #Tamiya 1/35 Tiger 1 Late. Dunkelgelb applied,whels painted and attached. Camo next #Scalemodels

30 3 2 0
Post image Post image

Decalling done on the Welsh 737-500. A few sloppy bits here and there, but overall I'm pretty happy with it, and chuffed to have had so few issues with these 30-year-old decals. It's a just a shame there is no engine stencilling, as they look a bit plain. Oh well.

#scalemodels #histscalemodels

13 1 0 0

Been making some progress on the M113.

At the detail painting and decal stage for the exterior. Did some chipping using my new technique of using a slightly lighter shade of the top coat and then lazy dry brushed metal.

#histscalemodels
#scalemodels
#buildthestash

14 1 1 0
Preview
Vampirella Glow in the Dark ver. 1/8 Scale Model Kit by X-Plus Dynamite | eBay X‑Plus Vampirella – Glow in the Dark ver. (1/8 Scale Assembly Model Kit). The sculpt retains the classic José González‑inspired Vampirella aesthetic with modern molding crispness. BothVampirella’s body and thetwo bats are molded in glow material, creating an eerie effect after exposure to light.

Check out Vampirella Glow in the Dark ver. 1/8 Scale Model Kit by X-Plus Dynamite, the latest item I added on eBay! #eBay #eBaySeller ebay.us/m/TSfYx1
#scalemodels

0 0 0 0
Post image Post image Post image

#histscalemodels #scalemodels This is my "palette cleanser" after a long building spree of WWII tanks and aircraft: a 1917 Model T ambulance. Still needs post-shading and weathering.

The blue color was a challenge. I ended up using Vallejo's Model Air IDF Blue with a drop of flat black.

54 6 5 0
HobbyBoss Aurum Imperialis 1/1250 scale model.

HobbyBoss Aurum Imperialis 1/1250 scale model.

The golden mermaid and golden ornaments added, now it is a real ship of the Golden Fleet.

#Scalemodels #WhatIf #cruiser #aurumimperialis

2 0 0 0
Advertisement for the Ottawa scale model showcase. Sept 27 2026 - 2100 Walkley Road 9:00 am to 3:30 pm

Advertisement for the Ottawa scale model showcase. Sept 27 2026 - 2100 Walkley Road 9:00 am to 3:30 pm

If you live in the Ottawa area.

Be there or be square!

#histscalemodels
#scalemodels

20 5 1 0
Post image Post image Post image

Finished the tiny Honda Motorcompo! Also have a picture of my biker gang (hot wheels versions). #scalemodels #histscalemodels #honda #motocompo #cars #carmodels

16 2 3 0
Post image Post image Post image Post image

Well these two guys are complete and ready to take control of Easy 8. Over the next few days I'll be giving the Sherman a coat of looking at. Planning out the build and studying the instructions. Got some 1/16 stowage ordered #histscalemodels #scalemodels

36 3 2 0
Nunu Beemax Lancia Delta S4 model kit - Two seat or interior panel components featuring yellow mesh-textured surfaces with navy blue upper trim sections, displayed on instruction manual pages with the model kit box visible in the background.

Nunu Beemax Lancia Delta S4 model kit - Two seat or interior panel components featuring yellow mesh-textured surfaces with navy blue upper trim sections, displayed on instruction manual pages with the model kit box visible in the background.

Nunu Beemax Lancia Delta S4 model kit - Engine mounting parts assembly shown on instruction manual page. Two black plastic components with yellow mesh-textured inserts positioned on top of technical diagram sheets, with a red and wood-handled brush tool resting across them.

Nunu Beemax Lancia Delta S4 model kit - Engine mounting parts assembly shown on instruction manual page. Two black plastic components with yellow mesh-textured inserts positioned on top of technical diagram sheets, with a red and wood-handled brush tool resting across them.

Nunu Beemax Lancia Delta S4 model kit - Rear sub-frame assembly showing three assembled components with bright yellow carbon-fiber pattern textured surfaces and white plastic structural frames, displayed on instruction pages over a cutting mat.

Nunu Beemax Lancia Delta S4 model kit - Rear sub-frame assembly showing three assembled components with bright yellow carbon-fiber pattern textured surfaces and white plastic structural frames, displayed on instruction pages over a cutting mat.

Nunu Beemax Lancia Delta S4 model kit - Single elongated aerodynamic panel component with yellow mesh carbon-fiber texture pattern, held with a wooden assembly tool, positioned on technical instruction diagram pages showing assembly details.

Nunu Beemax Lancia Delta S4 model kit - Single elongated aerodynamic panel component with yellow mesh carbon-fiber texture pattern, held with a wooden assembly tool, positioned on technical instruction diagram pages showing assembly details.

Painted the Kevlar parts of the #nunubeemax #lancia #deltaS4 in semi gloss clear #scalemodel #scalemodels #scalemodelling #scale124

3 0 0 0
Preview
ICM 48230 1:48 Ju-88A-8 Paravane WWII German Military Aircraft Plane Model Kit | eBay Paravane gear—steel cable cutters and deflectors designed to protect the aircraft from British barrage balloon cables during WWII. Manufacturer: ICM (Ukraine). ICM kits are known for sharp panel lines, accurate shapes, and well‑engineered assemblies.

Check this out! The ICM 48230 1:48 Ju-88A-8 Paravane WWII German Military Aircraft Plane Model Kit Get yours here at this link! ebay.us/m/KPTBMq #eBay via
#scalemodels

1 0 0 0
Preview
Great Wall Hobby F-14B Tomcat 1/48 Aircraft (L4828) | eBay Great Wall Hobby F‑14B Tomcat (L4828) – 1/48 Scale Model Kit. TheGWH L4828 F‑14B Tomcat is widely considered one of the finest modern Tomcat kits in 1/48 scale. It combines exceptional surface detail, smart engineering, and a wealth of options—making it a standout choice for modelers who want accuracy and display presence.

Check out this Great Wall Hobby F-14B Tomcat 1/48 Aircraft (L4828) at our #eBay store at ebay.us/m/FwDwxK and get yours! US Active Military/Veterans get a gift with purchse, See item description for details. #scalemodels

1 0 0 0
Post image Post image

First decals on the Welsh 737-500. Any fears I had about them evaporated after I tested one on a paint mule. Even after 30 years, they performed perfectly. I'd even go as far as to say that they're among the best decals I've used in recent times!

#scalemodels #histscalemodels

15 1 0 0
HobbyBoss Aurum Imperialis 1/1250 scale model.

HobbyBoss Aurum Imperialis 1/1250 scale model.

Everything added and ready to make it "golden"

#Scalemodels #WhatIf #cruiser #aurumimperialis

2 0 0 0