Photo of the portable version of the Space-Clock, featuring a translucent frosted plastic cover that diffuses the LEDs into a soft cyber-neon glow.
#MuesliTech
It's time for the portable Space-Clock in cyber-neon!
#FutureLooksGoodOnYou #ESP32 #MicroPython #NeoPixel #WS2812B #microcontroller #DIYelectronics
Four white LED candles glowing warm white, standing side by side, each connected with two colored wires to an ESP32-C3-SuperMini microcontroller board placed in front of them. The warm white light softly illuminates a white mug behind them with the inscription 'Merry Christmas'
#MuesliTech
Hey everyone, check out my smart NTP time-synchronized LED Advent candles with Wi-Fi!
I know, it’s a bit early, but that gives you more time if you want to build your own. 😉
#ESP32 #ESP32C3 #microcontroller #IoT #DIYelectronics #christmas #candles #advent
#MuesliTech
It’s time for new projects. Like this small version of the Space Clock as an LED matrix.
It opens up even more possibilities.
#haxko #ESP32 #ESP32c3 #MicroPython #WS2812B #NeoPixel #Paw
An open electrical control cabinet with multiple rows of components. At the top are miniature circuit breakers (MCBs) and residual-current devices (RCDs). Below them are terminal blocks with organized blue and orange control wiring. On the left side is a Siemens SIMATIC S7 PLC with several I/O modules. On the right side are Siemens industrial Ethernet switches. A Siemens Sitop power supply is also installed. Green Ethernet and fieldbus cables are connected to the switches, while various control and power cables exit the cabinet at the bottom through conduits. Several yellow warning labels are attached to indicate electrical hazards.
#MuesliPLC
Haven't posted about this topic in a while.
Kinda always looks the same anyway. 🫠
#MuesliTech #Siemens #Simatic #Industry #PLC #ProgrammableLogicController #SPS
A light-transmitting canvas stretched over a wooden frame. Colored LEDs glow through the canvas in yellow, green, blue, and red, arranged in clusters that represent the current time in the style of a Tix clock.
#MuesliTech #haxko
The project is finished!
It’s now called Space Clock because it should also be possible to display other variants on it, such as a binary clock, even though the Tix version is definitely the most impressive.
You can now find it at Haxko in […]
[Original post on woof.tech]
The Bambu Lab A1 mini during printing
The (powered-off) Tix clock is set against a white wooden backdrop, where the Neopixel LEDs and square light limiters are mounted. Two of the limiters, freshly glued, are each weighed down with a soda bottle and have purple spacers underneath. A long yellow spirit level lies in front, serving as a straightedge.
#MuesliTech
The Bambu Lab A1 Mini 3D printer really had to put in some work printing all those light limiters for me.
But things are coming along. I just need to finish the top row and work on completing the frame with the white fabric cover.
Once that’s done […]
[Original post on woof.tech]
A collage showing a setup for testing individually addressable LED pixels. The top image shows three parallel LED pixel strings taped to a table, with some LEDs lit in red, green, and blue. The LEDs are powered via an ESP32-S2 Mini microcontroller, which is connected to a laptop via USB. A laptop power adapter is also visible. The bottom-left image shows a coiled bundle of unused LED pixel strings and a sealed ESP32 S2 mini. The bottom-middle image is a close-up of the ESP32-S2 Mini with labeled pin headers and connected wires. The bottom-right image shows the laptop to program the ESP32.
#MuesliTech
After receiving the components, it's time to start the TIX Clock project. 🪄
The WS2812B LEDs are controlled via the ESP32-S2 mini using MicroPython. The time is updated over Wi-Fi from an NTP server during boot.
Now that the TIX Clock is running, all […]
[Original post on woof.tech]
Electrical control enclosure on a flat roof, with a transparent cover revealing internal components including a 4-channel switch actuator, a 4-channel dimming actuator, 12 small white power supplies, and terminal blocks. The enclosure is connected via several cables entering through cable glands on the bottom side. Two blue sockets with covers are mounted on the right side.
#MuesliKNX
It's on the roof and connected.
Of course, this won’t just be left like that. It will be properly mounted.
#MuesliTech #KNX
Wired plastic electrical enclosure containing a KNX setup. At the top, there is a 4-channel switching actuator on the left and a 4-channel dimming actuator on the right, both from Hager. Below them are twelve small white power supplies. The terminal blocks are now wired and organized. On the right side of the enclosure, two blue sockets with protective lids are mounted. A plastic bottom plate with multiple circular cutouts, intended for cable entries, is placed next to the enclosure on the workbench.
#MuesliKNX
Time to show the progress, since the project has been completed since last Friday.
The 12 spots each have their own small power supply, which I had to fit into the cabinet.
#MuesliTech #KNX
A electrical enclosure with DIN rail-mounted KNX actuators at the top. Below them are terminal blocks for wiring connections. The enclosure is placed on a workbench.
#MuesliKNX ✨️
A new small KNX project.
Glass canopy above the balcony with an awning, 12 spotlights, and switchable sockets. This box needs to go on the flat roof.
Later, a KNX server will be added to the distribution cabinet in the basement. This time in a […]
[Original post on woof.tech]
A DMF 200|8 CNC machine in an industrial workshop. The large machining center has closed double doors with viewing windows. A control panel with a screen and various tools are placed on a nearby workbench.
A close-up view of the internal components of the CNC machine, showing complex mechanical parts, wiring, and cable chains. The intricate arrangement of pneumatic and electronic systems supports the precise movement and operation of the machine.
Maybe I need a new category for this
#CNC #MuesliTech #machine #industry
Let me give you some context:
I was actually only working on the machine because a pump had stopped running. The error message was already showing on the control screen, but the CNC machine kept running. The worst that could have happened was the coolant […]
[Original post on woof.tech]
A wider view of an industrial CNC machine setup in a factory. Large black cabinets house electrical and automation components, while pumps and cooling systems are visible in the foreground. The factory ceiling with lighting and ventilation systems can be seen.
An open electrical control cabinet with various relays, circuit breakers, and industrial automation components. Cables are neatly routed to different terminals, and several Siemens PLC modules are installed.
A close-up of a control panel with multiple Siemens Simatic I/O modules. Thick industrial cables are routed through cable trays and connected to different modules.
detailed view of Siemens SINAMICS drive controllers mounted in an electrical cabinet. Cables, along with control wiring, are neatly arranged to supply and control different industrial equipment.
Fancy a bit of PLC? No?
Never mind, here we go!
#MuesliPLC #MuesliTech
#Siemens #Simatic #SINAMICS #CNC #machine #industry #PLC #ProgrammableLogicController #SPS #SpeicherProgrammierbareSteuerung
Three open electrical distribution cabinets in a technical room, with white plastic covers and multiple rows of circuit breakers, residual current devices, and other electrical components. The right cabinet is labeled 'UPS main distribution' and contains switches, disconnectors, and other electrical components. On the left, thick black cable bundles are secured to cable trays.
Operating this UPS requires a bit more...
#MuesliTech #Power #Backup #Battery #UPS #USV
