six models of troll infantry and adventurers with an assortment of ancient armour and weaponry

based and primed trolls from the upcoming Bronze Age/Fenris #RubbleCity kickstarter. there's ducks, dwarfs, and assorted other adventurers, too

more news soon!

workmat view of six white metal trolls in assorted ancient armour and equipment.

model of a troll berserker in gladiatorial armour, armed with a brutal hook sword.

troll warrior in scale armour advancing with double-ended spear and hoplite shield.

troll fighter in super heavy armour with crescent axe.

just assembling six of the new Bronze Age troll heavies and adventurers from the new #RubbleCity kickstarter coming...soon

assorted mud-brick buildings arranged into an ancient cityscape that could absolutely also work for a sci-fi setting.

more ex- @fogoumodels.bsky.social stuff confirmed en route to Fenris! another fine match with #RubbleCity that'll expand my architectural tabletop range considerably...

I maintain #RubbleCity is the best modular ruins and walls you can buy...

And you should buy them.

anthropomorphic duck adventurer in hero harness exploring stone ruins. his two-handed falcata rests on his shoulder and he's removed his horned helm for a better look at his surroundings. rolling hills arr seen in the background.

Herrek Irontits, Storm Khan, looks for somewhere to lay his weary beak

(one of our #RubbleCity adventurers range posed in the base set scenery from the same range, on a @handiworkgames.bsky.social backdrop)

closeup internal view of a partly completed model of a ruined building - the Rubble City basic set from @fenrisgames.com. there are climbing vines and plants winding through broken stonework.

new header pic #RubbleCity

freshly demoulded resin castings of a partially ruined stone building with two collapsed corners and a door in disarray. behind it are two jigsaw-fingered matching stone walls and some curved fieldstone walls.

somebody's stocking up on #RubbleCity

resin model walls on a well-used worktop stained with paint.

top down view of the same walls. there's a coil of orange pressure house in view beneath the worktop.

different view agai n with the walls laid out in an alternate configuration.

our modular #RubbleCity ruins allow for more combinations and variations than my brain can calculate

i've got some #RubbleCity ones that's been WIP for only about three years

model of a walled gate being held in a desktop extraction unit while weathering and detailing stonework with a flexible Dremel.

Sunday stonework for #RubbleCity

WIP model of a tall rendered stone wall with parts of the coating flaking away. either end has finger joints allowing the connection of varied other parts, such as the Hittite-style triangular arch piece attached to its right.

testing higher heights #RubbleCity

model wall section - a square doorframe with Doric pilasters and part-rendered wall.

Saturday stonework wip for #RubbleCity

compact but very detailed game board featuring multi-levelled ruined buildings in a cliffside site, connected together by damaged wooden walkways.

always a pleasure to see the excellent @exit23.games display board using our #RubbleCity kits out in the Wild!

somebody's been copying my #RubbleCity builds again

Bases of two model stone columns mounted on ruined staircases. There's assorted greenery and shrubbery growing on and through the ruins.

A verdigris-stained metal statue of an Amazon warrior holding her helmet in one hand and her shield in the other, mounted on top of one of the ruined columns.

Wider view of one of the two model columns with statue on top.

First texture pass on some more display samples of #RubbleCity - lots more tufting before they're done.

Interior view from a ruined tower remnant of a 13th century sandstone tower showing an arched doorway and flanking stepped windows.

Exterior tower wall of the same castle, most of the exterior sandstone blocks removed for local building, with the exposed rubble core and remnants heavily weather worn and thoroughly covered with moss, lichens and grass.

View across a reed-choked moat towards another ruined tower base, again showing considerable stone removal and heavy weathering of the soft sandstone structure.

Closeup of a common feature where decorative and structural limestone blocks have been removed leaving regular sockets in the stone wall.

Oodles of #minspiration at Bollingbroke Castle yesterday. I can see I'll need to restock on tufts for the bext display piece of #RubbleCity.

Next #RubbleCity project, after the next but one?

Two partially collapsed processional gate columns astride a ruinous stone path and surrounded by scattered rubble.

Very rough base washes and mid-lights in progress on some #RubbleCity getting done tonight while we tried being Killers of Giants in tonight's Umerica game.

Base of a model of objective ruins with low staircase, partially collapsed stone wall, fallen blocks and damaged plasterwork on acolumn with stylised rising Sun motifs.

Very rough base washes in a new WIP for the #RubbleCity show cabinet.

Length of model wall with towers and a single buttress, WIP model.

More model wall sections, with a ruined pterrosphinx and duck adventurer for scale.

Front view of early WIP on model trapezoidal wall system.

Thanks ☺️ Stonework matches #RubbleCity! No direct fit with finger-jointed pieces but the build process and look is identical. This is going to be a full walled garden set for KS in the Summer, all being well...

Ruined section of cyclopean wall with collapsed brick liner and rubble core. A hooded figure stands nearby for scale.

Top 3/4 down view of the same model wall piece.

Rearside of the same wall.

Think this ruined beast is *finally* ready to go into silicone. One last pass to make sure then it's onto gate sections and buttresses for @forgeofice.bsky.social 's Hanging Gardens #RubbleCity set.

3/4 overhead shot of a ruined stone building with partial first floor.

Another, longer stone ruin with large gapped walls and a scattering of short stone columns.

Different view of the same ruin looking through and over two columns.

Remaining corner of a taller ruin with a mostly collapsed upper floor.

Somebody's ordered a whole bunch of our #RubbleCity to fill a tabletop with, maybe they've seen @peachytips.bsky.social 's set in action.

Section of a model ruined wall with exposed rubble core and brick retaining inner wall. Bricks and chunks of stone scatter loose inside a cyclopean outer wall of giant blocks. There are *lots* of small fans still to be filled.

Of course, the biggest problem with building a miniature ruined stone wall using actual stones is that you have to make it all pressure-castable by filling every last air gap where liquid silicone might get in.

Could be here a while. #RubbleCity

Model of a stone block wall in progress. Built to represent a smashed inner wall with clay brick liner and rubble hard-core infill. It's sitting on a desk next to two glass ramekins filled with small pieces of gravel sorted by size.

First pass on another new #RubbleCity piece with @forgeofice.bsky.social

I predict more gap filling...

Collection of cast resin blocks making a raised, two-tier and staircases walled platform with an arched single storey building adjacent.

A different arrangement of stairs, blocks, broken columns and marker stones, posed with a troll adventurer model.

Two single storey model buildings, one with a near-complete shingle roof and the other open to the air.

I'll say one thing for this shite weather: it's ideal for sitting indoors with the Hound, fiddling with your #RubbleCity stonework.

Five model stone walls fixed to elongated oval bases scattered with sand. All are resting on a (non-running) belt linischer that's not been hoovered clean of dust in a while.

Five WIP walls, some #RubbleCity, and an absolutely *filthy* linischer corner.

Thanks! All from the #RubbleCity range on my webshop.

Set of six partially assembled metal adventurer models.

Just proved the new #RubbleCity models from BronzeAge are multipose by accidentally fitting the wrong arms and weapons on three of them and only realising when I had a shield left over.

Adventurer in Corinthian armour advancing at a crouch with sword and shield.

Model of an adventurer in gladiatorial armour carrying bow, sword and shield.

Amazon adventurer with long spear and shield running to attack.

Adventurer in lamellar armour and horsehair helm firing their bow towards the viewer.

Samples of BronzeAge Minis' new range of #RubbleCity miniatures from @mad-elf.bsky.social should be here at the workshop next week, and on the website ASAP. A set of pewter adventurers equipped with the kit necessary to risk life and limb in any tabletop ruined city.

Gladiator adventurer with plumed helmet, sword, shield and bow.

Horse-helmeted adventurer with spear and shield.

Zombie with bite injuries wearing partial Greek armour.

Serpentine medusa with bow.

More #WIPs from David at Bronze Age minis in conjunction with our #RubbleCity range. New adventurers and updated older models with packs and exploration gear, swappable heads and shields. Plus suitable undead and monsters! Keep 'em peeled...