Photo of a small clear plastic box l, the size of a deck of playing cards. In it is a bread board and a small ESP32. A yellow post it is on top saying “Small Tree. Max 3 strands. 172.30.0.59”
Raise your hand if you have to jot down the IP address for your #ChristmasTree lights so you don’t forget it.
👋
Anybody? Anybody? Just me, then.
#wled #esp32 #homeautomation
🐶💡 A new maker blog post is up! Here's a project that helped me get acquainted with WLED and a new generation of microcontrollers.
wbrowar.com/article/maker/pet...
#WLED #LED #maker #DIY
Almost done! Just the railing left. #wled
Pines de conexión de #WLED para 2 salidas de un #ESP8266 #NodeMCU.
En un salida una tira de LEDS #WS2812 y en la otra salida un ventilador con leds compatibles.
www.infotronikblog.com/2024/03/wled...
Still WIP #NeuralDSP #QuadCortex #QC #Wled #TypeONegative #Pedalboard
The #WLED fireworks animation looks pretty nice in it, too 😄
Snow iglo tower with red lighting inside
Snow iglo tower with blue-purple light inside
#wled with a string of 99 ws2812 for some amazing light effects.
Powering it up and placing our finished V-Slot Christmas Tree in the showroom.
V-Slot framing used in this project: 1ma.kr/7v5y0
WLED: 1ma.kr/2d9z2
#MakerStore #MakerStoreAU #MakerStoreUSA #MakerStoreUK #maker #CustomProject #VSlot #LEDProject #WLED
Part 5: Connector Install
V-Slot framing used in this project: 1ma.kr/7v5y0
WLED: 1ma.kr/e6xry
Stay tuned for the final part.
#MakerStore #MakerStoreAU #MakerStoreOfficial #MakerStoreUSA #MakerStoreUK #maker #CustomProject #VSlot #LEDProject #WLED #MakersGonnaMake #DIYLights
Photo of an ESP32 chip laying like a dead spider with its pins up in the air. 3 wires are connected to 3 pins: power, ground, and data. The ground wire is not connected to a data pin. Only an imbecile would do that.
Photo of a small, artificial Christmas tree. It has coloured lights in a rainbow pattern with green at the top on through yellow, red, and then finally green again at the bottom.
Like any normal #homeautomation enthusiast I just happened to have an ESP32 and a 4 amp 5V power supply laying around. So I bought a couple more strands of WS2811 lights, flashed #WLED on it,and poof! second holiday tree is lit.
Here’s a hot tip from a pro […]
[Original post on infosec.exchange]
Insulating the exposed wire with heat-shrink tubing — slide it on, then tighten it up with the Heat gun for a clean, safe connection.
Heat shrink used in this project: 1ma.kr/mzgkn
Stay tuned for Part 3.
#MakerStore #MakerStoreAU #MakerStoreUSA #MakerStoreUK #maker #CustomProject #VSlot #WLED
Just did a proper WLED install for the first time. Bit fiddly as it’s a 5M strip so needed power at both ends which meant soldering was involved, but very pleased with the result! #WLED
„Oh nein, die Flacker-LED in der Echtwachs-Kerze ist kaputt…“
„Kein Problem, Schatz! Ich baue uns etwas Geschmackvolles!“
#wled #blinken #led #Weihnachtsbeleuchtung
A lit and decorated Christmas tree, with a “star” tree topper (a 16x16 customizable panel; that’s the Swift-powered part).
The #Embedded #Swift (ESP32) powered Christmas Tree v2025 is live.
(The light strands are also ESP32-powered; via #WLED )
I've been playing with #wled and #pixelart -- here is my first attempt, for the musical I am producing. This will go in the costume of the main character.
I've been working on some #wled stuff for costumes, here is an animated heart that will go inside the main character.
#LED #PixelArt #Heart #OriginalMusic #Short
youtube.com/shorts/0eFDr...
[wip] #furryfandom #wled, soon...
Sometimes I forget how much of a nerd I am. I got very excited during a team meeting this morning when my #PowerShell meeting notification script was able to flash the LED strip under my monitor via #WLED. When I have a meeting in <5m my monitor does a slow red flash.
Learn here how to install the wLED binary, which means flashing your ESP32 microcontroller.
Make sure your power source is constant, which means use a uninterruptible power supply, UPS, at least while you are flashing!
Please do not brick your ESP32 […]
[Original post on mastodon.bsd.cafe]
This is een important word of warning from the wLED Creator
New setups should use the ESP32 not the dated ESP8266 because that reaches end of life
Heed his Warning
https://kno.wled.ge/basics/getting-started/
#SBC #ESP32 #controller #NeoPixel #WLED! ✨ […]
[Original post on mastodon.bsd.cafe]
These are the links to the previous toots regarding the subject
Toot zero
mastodon.bsd.cafe/@Dendrobatus_Azureus/115...
Toot one
mastodon.bsd.cafe/@Dendrobatus_Azureus/115...
#SBC #ESP32 #Raspberry #Pi5 #controller #NeoPixel #WLED! ✨ #ESP8266 […]
Now you can learn how to do the wLED control on the Raspberry Pi5
So first start with my previous post then come to this one. Of course you understand why this logic is used; first learn to crawl then Sprint […]
[Original post on mastodon.bsd.cafe]
My SBC of choice is the Raspberry Pi5 I want to control WLED with it!
So i dug further and found this site
#SBC #ESP32 #controller #NeoPixel #WLED! ✨ #ESP8266 #webserver #WS2812B #WS2811 #SK6812 #LEDs #SPI #WS2801 #APA102
tynick.com/blog/11-03-2019/getting-...
Today I learned about an incredible project for the ESP32 project WLED! ✨
It's an implementation of a ESP32/ESP8266 webserver to control NeoPixel LEDs
Read all about it on the website.
https://kno.wled.ge/
#SBC #ESP32 #controller #NeoPixel #WLED! ✨ […]
[Original post on mastodon.bsd.cafe]
