Advertisement · 728 × 90
#
Hashtag
#nRF52832
Advertisement · 728 × 90
Preview
Amiibo Emulator Becomes Pocket 2.4 GHz Spectrum Analyzer As technology marches on, gear that once required expensive lab equipment is now showing up in devices you can buy for less than a nice dinner. A case in point: …read more
0 0 0 0
Preview
nRF52832 VS nRF52840: Choosing the Right Bluetooth Workhorse Silicon at a Glance The nRF52832 arrived in 2016 with a 64 MHz Cortex-M4 and 512 kB of flash, while the nRF52840 landed a year later boasting a 64 MHz Cortex

Silicon at a Glance


The nRF52832 arrived in 2016 with a 64 MHz Cortex-M4 and 512 kB of flash, while the nRF52840 landed a year later boasting a 64 MHz Cortex-M4F, 1 MB of flash, and a bigger radio engine. #nRF52832 #nRF52840
www.tecksay.com/BluetoothMod...

0 0 0 0
Preview
Reverse-Engineering SKS Airspy Tire Pressure Sensors For Custom Firmware Although a somewhat common feature on cars these days, tire pressure sensors (TPS) are also useful on bicycles. The SKS Airspy range of TPS products is one such example, which enables remote monitoring of the air pressure either to a special smartphone app (SKS MYBIKE) or to a Garmin device. Of course, proprietary solutions like this require reverse-engineering to liberate the hardware from nasty proprietary firmware limitations, which is exactly what [bitmeal] did with a custom firmware project. Rather than the proprietary and closed communication protocol, the goal was to use the open ANT+ sensor instead, specifically the (non-certified) TPS profile which is supported by a range of cycling computers. Before this could happen the Airspy TPS hardware had to be first reverse-engineered so that new firmware could be developed and flashed. These devices use the nRF52832 IC, meaning that development tools are freely available. Flashing the custom firmware requires gaining access to the SWD interface, which will very likely void the warranty on a $160 – 240 device. The SWD programmer is then attached to the 1.27 mm spaced SWD holes per the instructions on the GitHub page. After flashing the provided `.hex` file you can then connect to the TPS as an ANT+ device, but instructions are also provided for developing your own firmware.

Reverse-Engineering SKS Airspy Tire Pressure Sensors for Custom Firmware Although a somewhat comm...

hackaday.com/2025/02/25/reverse-engin...

#Reverse #Engineering #air #pressure #nRF52832

Event Attributes

1 0 0 0
Preview
Reverse-Engineering SKS Airspy Tire Pressure Sensors for Custom Firmware Although a somewhat common feature on cars these days, tire pressure sensors (TPS) are also useful on bicycles. The SKS Airspy range of TPS products is one such example, which …read more
0 0 0 0
Preview
Reverse-Engineering SKS Airspy Tire Pressure Sensors For Custom Firmware Although a somewhat common feature on cars these days, tire pressure sensors (TPS) are also useful on bicycles. The SKS Airspy range of TPS products is one such example, which enables remote monitoring of the air pressure either to a special smartphone app (SKS MYBIKE) or to a Garmin device. Of course, proprietary solutions like this require reverse-engineering to liberate the hardware from nasty proprietary firmware limitations, which is exactly what [bitmeal] did with a custom firmware project. Rather than the proprietary and closed communication protocol, the goal was to use the open ANT+ sensor instead, specifically the (non-certified) TPS profile which is supported by a range of cycling computers. Before this could happen the Airspy TPS hardware had to be first reverse-engineered so that new firmware could be developed and flashed. These devices use the nRF52832 IC, meaning that development tools are freely available. Flashing the custom firmware requires gaining access to the SWD interface, which will very likely void the warranty on a $160 – 240 device. The SWD programmer is then attached to the 1.27 mm spaced SWD holes per the instructions on the GitHub page. After flashing the provided `.hex` file you can then connect to the TPS as an ANT+ device, but instructions are also provided for developing your own firmware.

Reverse-Engineering SKS Airspy Tire Pressure Sensors for Custom Firmware Although a somewhat comm...

hackaday.com/2025/02/25/reverse-engin...

#Reverse #Engineering #air #pressure #nRF52832

Event Attributes

0 0 0 0
Post image

Preisverfall bei den Amiibolink #nRF52832 #NFC Emulatoren ist ja auch heftig. Jetzt werden die schon für 2.79EUR im "Bundle deals" (3 Teile kaufen, 6 Tage Lieferung inkl) verscherbelt

1 0 1 0