4
0
0
0
Hashtag
#kunstschulewien
Advertisement · 728 × 90
I applied one coat of paint to the interior and two coats to the exterior, keying the surface with sandpaper in between coats.
#art #vienna #exhibition #artschool #kunstschule #kunstschulewien #diploma
1
0
0
0
I also wanted the covers to be fixated along the floor, so I cut a bunch of wood pieces and used hot glue to adhere them to the floor.
#art #vienna #exhibition #artschool #kunstschule #kunstschulewien #diploma
2
0
0
0
Let it cure over night, remove the staples, fill out the markings with fairing compound, let that cure and then sand everything again.
#art #vienna #exhibition #artschool #kunstschule #kunstschulewien #diploma
5
0
0
0
Once again I filled out the markings from the staples using fairing compound and let that cure over night.
Once the fairing compound had fully hardened it was time to sand everything again.
#art #vienna #exhibition #artschool #kunstschule #kunstschulewien #diploma
0
0
0
0
diploma project work in progress:
Installed eye screws high up in the wall. Drilled and set plastic anchors first.
#art #vienna #exhibition #artschool #kunstschule #kunstschulewien #diploma
1
0
0
0
Unfortunately some plywood straps reached all the way to the top edge so I had to remove them with a hammer and chisel (while not damaging the delicate panels).
#art #vienna #exhibition #artschool #kunstschule #kunstschulewien #diploma
1
0
0
0
After the glue had cured for 1 day I had to remove the staples in order to be able to fair and sand the seams.
#art #vienna #exhibition #artschool #kunstschule #kunstschulewien #diploma
1
0
0
0
1st steps with my diploma project for June.
I started 3D modelling the exhibition space in order to have a quicker way to test my ideas. I'm concerned not all of these ideas work in this particular space.
#art #vienna #exhibition #painting #artschool #kunstschule #kunstschulewien #3dmodelling
3
0
0
0