Power Noises.... I have two small leaks at the troublesome spots I anticipated so hopefully it can seal up soon and minimize the mess.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Finally making the epoxy moon lamp I've always wanted to make. 24v FCOB strip will go around the outside and epoxy will fill the moon shape. Should look wicked.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Fuck a tariff and fuck you if you support this bullshit.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
The bird's nest in action!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
It's Alive!!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Each LED lines up to each square and fiber optics are fed through the holes.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Something like 15 iterations later I finally have the LED ring ready for some fiber optics!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Working on a new kitchen gadget to make cooking and cleaning easier than ever! Neodymium magnets, epoxy, and just good design!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
The finished bucket!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
I needed a tool bucket to screw into the shelf my 3D printer sits on. Here's the creation video. [And my first!]
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
I had one of these already and its so cute I had to make 3 more!
www.thingiverse.com/thing:903411
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Working on a high voltage box design that will house a 300w power supply with plenty of space to cram in a power switch, a mic, fuses, and the ESP32.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Quick desk organizer I made before the weekend.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
First one done!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Working on some cheap, flexible, and powerful lighting hardware for photography, making use of a basic neopixel 16x16 LED panel.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Working on some cheap, flexible, and powerful lighting hardware for photography, making use of a basic neopixel 16x16 LED panel.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
One more showing off the WLED strip.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Megabowl LED mapped inside Hyperion which draws the middle of the screen into the WLED strip!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
The MegaBowl is done!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Oh baby!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
The Megabowl is coming right along!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
3D printed LED diffuser
The diffuser ring printed perfectly! I am going to use a higher fidelity FCOB strip than these but it already looks absolutely stellar and I'm so pumped!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
3D printed, rainbow bowl
Failure is always an option but I still love how this is coming out. This will become an epoxy test.
New 3D printer tomorrow! K2 Plus!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
3d printer
Dreaming of perfect popcorn in the best bowl ever made...
Diffuser to epoxy to testing!!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Trying out a brand new extruder with upgraded, hardened steel gears.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
The diffuser will be printed in transparent PLA and the LEDs will be FCOB strips in the hopes that the halo glow will illuminate but not annoy.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
I was struck by the inspiration to make a better popcorn bowl so this is what I came up with. The bowl and diffuser will be separate and epoxied and the inside will be lined with LEDs
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
A piece I am working on which takes advantage of 5mm strips I'm calling "el Rio"
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
Toothbrush holder for traveling, designed in under an hour. Neodymium holds both parts together with a vent/grip slot.
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
The space station internals are coming together swimmingly!
#cad #cad3d #3d #3dprint #3dprinting
#onshape #parametriccad #WLED #led #ledshow #anikimakes
