📢 @vubrussel.bsky.social B-PHOT & CHIS research on scalable SERS substrates via triboelectrification self-assembly featured in Hot Topics in Small Methods!
🔗 https://bit.ly/4dUJy0N
#SERS #Photonics #Nanofabrication
In this review, MingLee Tang @utah.edu and Tian Qiao @unlv.edu explore #CircularlyPolarizedLight (#CPL) 🌀💡and its potential to fabricate chiral plasmonic #nanostructures.
👉 https://tinyurl.com/2p9ptese
#Plasmonics #CircularDichroism #nanofabrication #BJNANO 💎🔓
[Open Access]
Nanoscale direct patterning in ultrathin silicon nanosheets utilizing helium ion microscopy
2025 Jpn. J. Appl. Phys. 64 03SP57
iopscience.iop.org/article/10.3...
#JJAP
#Physics
#Openaccess
#Helium
#ion
#microscopy
#silicon
#nanosheet
#nanofabrication
#nanopore
Congratulations to Photon Foundry, a recipient of pre-seed funding from ANFF for its optimised single-photon emitters for quantum technologies. #NCRIS #ANFFNetwork #Nanofabrication #Commercialisation #Quantum
anff.org.au/news/photon-...
🚨 Fully Funded PhD in Computational Chemistry
I’m recruiting a PhD student at the University of Surrey
for HeLix: Atomic-Scale Modelling of Advanced Helium Lithography.
Start: Oct 2026
Apply here:
surrey.ac.uk/fees-and-fun...
#PhD #ComputationalChemistry #SurfaceScience #Nanofabrication
An overview of techniques for the large-area #Nanofabrication of optical #Nanostructure arrays and lattices, the modification of complex hybrid structural units, and the future prospects of lattice nanofabrication.
#OpenAccess: doi.org/10.1088/2631...
The Infrachip Accelerator Programme took over INL!
Our experts guided early-stage researchers through:
➡️ Core steps in micro/#nanofabrication
➡️ #Advancedcharacterizationtechniques
🔗 Full story here: inl.int/infrachip-research-accel...
Explore how Nurten Koc’s award-winning silicon metalens was made with the DWL 66⁺ Laser Lithography System: 250 nm gaps, high aspect ratios, low-temp patterning, and scalable fabrication for mid-IR flat optics.
👉 heidelberg-instruments.com/wp-content/u...
#FlatOptics #Metalens #Nanofabrication
Proud to be a Finalist at Industry Update's Australian Manufacturing Awards 2025! Excited to celebrate innovation and excellence in our industry. Find out more at www.industryupdate.com.au/article/aust...
#AMTIL #ANFFNetwork @anff-sa.com #AdvancedManufacturing #Nanofabrication #Innovation
Event course link ➡️ roycecleanroomtraining2026.eventbrite.co.uk
@universityofleeds.bsky.social @swanseauni.bsky.social
#CSConnected @cambridgephysics.bsky.social
#RoyceCambridge #CORDE #trainingcourse #transistorfabrication #semiconductor #nanofabrication #Research #Academia #Industry
CORDE facility
One of the facilities offered by CORDE.
🌟 Cambridge’s Collaborative R&D Environment (CORDE) is your gateway to world-class #nanofabrication, #characterisation, and precision fabrication. Our mission is to power your future physics research with flexible support and collaboration. Explore the CORDE offer: corde.phy.cam.ac.uk
We are hiring! please consider this oportunity for #nanofabrication engineer in #gothenburg #sweden #Quantum
www.linkedin.com/jobs/view/43...
Event course link ➡️ roycecleanroomtraining2026.eventbrite.co.uk
@universityofleeds.bsky.social @swanseauni.bsky.social #CSConnected @cambridgephysics.bsky.social
#RoyceCambridge #trainingcourse #transistorfabrication #semiconductor #nanofabrication #Research #Academia #Industry #CambridgeUK
The koala was printed with fluorescent UpPhoto resin and the total size is 7mm tall.
We’re excited to be exhibiting at #MicroTAS2025 with the global microfluidics community.
#NCRISImpact #microTAS #microfabrication #nanofabrication #southaustralia #australia #chips
🧑🏫🔬Building tomorrow’s semiconductor workforce: Research & Prototype Foundry, a #UYSYD Core Research Facility, was delighted to host sydney.edu.au's Prof Teng-Joon Lim & Faculty of Engineering students to explore micro-credentials, short courses & hands-on learning. #Semiconductors #Nanofabrication
Episode 4: Properties of Nanomaterials:
Materials behave differently at the nanoscale due to quantum effects and increased surface interactions.
#Nanofabrication #NanoEngineering #NanoDevices #Nanotechnology
youtu.be/CkCx4KZ6CBg
Mark your calendars for September 3rd, 2025, at 11:00 AM at the University of Ottawa, ARC 233!
For a seminar hosted by Associate Professor Ksenia Dolgaleva, featuring Dr. Kashif Masud Awan, a nanofabrication expert.
@uottawa.ca @uottawa-innovation.bsky.social
#Nanofabrication #Photonic
Réservez vos calendriers pour le 3 septembre 2025 à 11h00 à l'Université d'Ottawa, ARC 233 !
Pour un séminaire animé par professeure associée Ksenia Dolgaleva, mettant en vedette Dr Kashif Masud Awan, un expert en nanofabrication.
@uottawa-innovation.bsky.social
#Nanofabrication #Photonique
👀 Virtual reality is building nanotechnology capabilities for future generations!
ANFF-SA has unveiled the first "ANFF Virtual Reality Training for Nanotechnology Equipment and Processes."
Read More: www.anff-sa.com/case-studies...
#NCRISI #nanofabrication #virtualreality #VR @anff.org.au
#engineer #permanent position at INL #Micro and #Nanofabrication #Facility buff.ly/1LcatzO #Spintronics Pilot #Production; #cleanroom #MTJ #magnetism #lithography
What if parts of a 3D-printed structure could vanish in the dark? QUT researchers have developed a photoresist that enables selective degradation of microstructures, triggered by the absence of light. A leap for additive manufacturing!
#NCRIS #MaterialScience #DLW #3DPrinting #nanofabrication
Surgery just got smarter—Haemograph’s portable blood rheometer gives clinicians instant, personalised insights into clotting behaviour—helping them make faster, safer decisions in the operating room and beyond.
#NCRIS #MedTech #SurgicalSafety #BloodHealth #microfluidics #nanofabrication
Infrared drones that see through smoke? A new breakthrough from Wenwu Pan, UWA and ANFF-WA will make high-performance fire-spotting tech cheaper and scalable — helping us detect bushfires earlier and respond faster to protect lives and land. #NCRIS #DroneTech #Nanofabrication #BushfirePrevention
Image collage of some of the ANFF-SA team at Australian Manufacturing Week (AMW) in Melbourne.
This year's Australian Manufacturing Week (AMW) did not disappoint! Great opportunity for the ANFF-SA Precision Engineering & 3D Printing teams to meet with many of our suppliers and customers in person and see the latest and greatest technology around.
#NCRISimpact #ANFFNetwork #Nanofabrication
Stable 3D quantum dot #nanostructures with sub-100 nm resolution and 600 °C heat resistance.
Now possible via hybrid laser lithography.
#OpenAccess in #IJEM
🔗 doi.org/10.1088/2631-7990/adaab1
#3DPrinting #Nanofabrication #AdditiveManufacturing #LaserFabrication #ExtremeManufacturing #Nanophotonics
💡 New Low-Cost Rewritable Polymer Discovered by @flindersuniversity.bsky.social Researchers: Sustainable Leap in Data Storage Technology 💾
Read: www.anff-sa.com/case-studies...
#NCRISimpact #ANFFNetwork #nanofabrication #SulphurPolymers @micro-au.bsky.social
ANFF proudly represented 🇦🇺 at ENRIS 2025 - a key international event for sharing best practices in nanotechnology and advanced manufacturing.
#NCRIS #EuroNanoLab #nanoFabUK #Collaboration #Innovation #nanofabrication @janefitzpatrick.bsky.social @karynjarvis.bsky.social @nicovoelcker.bsky.social
#hiring #recruiting #CMOS #semiconductors #diodes #transistors #microelectronics #MEMS #antenna #SolidStateDevicePhysics #CleanRoom #microfabrication #nanofabrication #MaterialsScience #neuromodulation #DBS #DeepBrainStimulation #Electrophysiology #Brain #InVivo #ImplantableMedicalDevices
We've got a webinar you won't want to miss coming up this week on the 15th—with Jelena Vuckovic at Stanford.
www.laserfocusworld.com/webinars/web...
#chipscale #photonics #nanofabrication
In our latest collection of #free #teaching #resources, we explore #nanofabrication with the Community College of Allegheny County and Penn State University in the US.
futurumcareers.com/turbochargin...
